Results 1 to 6 of 6
-
07-19-2010, 11:03 AM #1
12v plug-in adapter will not reset??
I have checked all the wiring and no loose wires on the reset or the 12V plug in's, I know in other threads guy's have a loose wire or a short, can't find anything, is there something I am missing, has anyone run into this. I have a 2004 Mobius LSV.
Thanks for any advise.Last edited by T100; 07-23-2010 at 05:16 PM.
2004 MOBIUS LSV
2008 Tacoma
-
07-23-2010, 05:15 PM #2
Can anyone help me on this one.
2004 MOBIUS LSV
2008 Tacoma
-
07-23-2010, 05:18 PM #3
Do you have one of those test lights to see if you're getting any power to the adapter?
2011 President's Trophy - Check
2011 Western Confernece Champs - Check
2011 Stanley Cup Champs - Not so Much....
2007 Outback V
-
07-23-2010, 05:50 PM #4
The rubber reset trips out after I push on it and will not allow power to the adapter. I've disconected and put back on all the terminals and all is tight. I think it is a short but have no idea where to start.
2004 MOBIUS LSV
2008 Tacoma
-
07-24-2010, 08:31 AM #5
test the terminals disconnected from the 12v outlet,the 12 outlet could be bad and causing the breaker to trip.
A Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
-
08-25-2011, 10:52 AM #6