Results 1 to 4 of 4
-
07-07-2010, 10:10 PM #1
Junior Member
- Join Date
- Feb 2010
- Location
- smyrna, TN
- Posts
- 9
kicking/grinding noise from walter v-drive
noticed noise and thought I had hit a log. Noise kept happening when boat gets up to 25 to 30 mpg. pulled cover under backseat and sounded like it was coming from v-drive. It is very short loud kicking and grinding noise. Boat is a 06 moomba mobius with walter v-drive. I'm guessing one of the teeth on the gears is bad. Any ideas?
-
07-08-2010, 07:50 PM #2
Junior Member
- Join Date
- Feb 2010
- Location
- smyrna, TN
- Posts
- 9
vdrive noise
Pulled v-drive today and found where linkage was hitting housing. Now I just need to figure out why?
-
07-08-2010, 09:37 PM #3
Senior Member
- Join Date
- Jul 2002
- Location
- London Ontario Canada
- Posts
- 2,259
did you pull the vdrive off the transmission ....do you have any pics?
09 21v LAUNCH
99 Outback LS. Sold
run your engine after you change your oil
68 th Member. WS420,HSE Revolution, OJ 466, Acme1157,1100 sacs,Kicker HLCD's n IX500.4, Supra Coolies
Doug
-
07-08-2010, 10:12 PM #4
Junior Member
- Join Date
- Feb 2010
- Location
- smyrna, TN
- Posts
- 9
Yeah I pulled it off the transmission, but no pics. I'll have to take some tomorrow. Best way I can describe it is the linkage housing has some scraping on the bottom from linkage closest to the gearbox. I'm just curious if the problem is bearings or alignment. Gonna take it to get checked out tomorrow.
Reply With Quote