Results 1 to 10 of 10
  1. #1
    Join Date
    Jul 2010
    Location
    Clarksville, TN
    Posts
    7

    Default Moomba Outback V Wake Pods

    Hey guys. We just finished this one at our shop, SONUS Car Audio. Custom molded wake tower pods that hold four Image Dynamics 165mm Coaxials, we also installed three more sets of 165's in the side panels and bow. Two amplifiers, a four channel Image Dynamics i4500, and a five channel i5800. There is one IDQv3 10" woofer. We upgraded the battery to an Optima Marine, and added a second battery for reserve power. Kenwood Source with USB.iPod and Sirius satellite radio, as well as a drivers side Kenwood marine controller. I'll use four or five posts to show you guys everything.

    Let me know what you think.




  2. #2
    Join Date
    Jul 2010
    Location
    Clarksville, TN
    Posts
    7

    Default SONUS Car Audio Moomba Project-Continued

    [IMG]http://i137.photobucket.com/albums/q238/mwilliams_as/IMG_2367.jpg
    [/IMG]


  3. #3
    Join Date
    Jul 2010
    Location
    Clarksville, TN
    Posts
    7

    Default SONUs Car Audio Moomba Project-Continued





  4. #4
    Join Date
    Jul 2010
    Location
    Clarksville, TN
    Posts
    7

    Default SONUS Car Audio Moomba Project-Continued





  5. #5
    Join Date
    Jul 2010
    Location
    Clarksville, TN
    Posts
    7

    Default SONUS Car Audio Moomba Project-Last three pics




  6. #6
    Join Date
    May 2010
    Location
    Muskoka, Ontario
    Posts
    427

    Default

    looks good how did you get them to be perfectly tapered like that

  7. #7
    Join Date
    Jun 2008
    Location
    Henderson, NV
    Posts
    7,020

    Default

    the finished product look good. looks like these guys do some good 'glass work.. reminds me of the mb tower pods.
    not my taste, but good work.
    '06 Supra Launch 20SSV-gone but never forgotten

  8. #8
    Join Date
    Jul 2010
    Location
    Clarksville, TN
    Posts
    7

    Default

    On getting the perfect shape, the foam starts in block form, you sand it into the shape you want with 36 grit sandpaper, then finish sand it with 80 grit. Then put the tape right over the 80 grit surface.

  9. #9
    Join Date
    Apr 2010
    Location
    Clarksville, TN
    Posts
    44

    Default

    Looks great, are you running north of the Conservation club or down by Trice landing when you put in. Saw your boat before you put the speakers on a few weeks back but haven't seen it since.
    2006 Moomba OBV-"If you had not committed great sins, God would not have sent a punishment like me upon you".

  10. #10
    Join Date
    Jul 2010
    Location
    Clarksville, TN
    Posts
    7

    Default

    The boat actually belongs to my attorney.I'm not sure where he put's in at. If you are in the Clarksville area, and would like to hear this thing in person, we can probably set that up. Our shop is off I-24, exit One, beside Gatti's Pizza. We also have a really aggressive Tige' that we did some pods,etc...on, and they both are really nice. Just finished up a Boston Whaler as well.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •