Results 1 to 2 of 2
-
07-01-2010, 09:48 PM #1Junior Member
- Join Date
- Jun 2010
- Location
- Johnson City, TN
- Posts
- 10
Should I have a concern about the red/black wires on bottom of fuel pump while...
pouring water on the fuel pump if vapor lock occurs? Sorry for the stupid question, but just want to make sure if vapor lock occurs again and I do pour water on it to cool it down that I don't have to worry about the wires (I believe there are red and black wires on the bottom of the fuel pump?).
I have an 325 MPI Indimar on my '09 Outback.
Thanks,
Brian
-
07-02-2010, 12:12 AM #2
I had the Vapor lock problem one summer in Vegas. It was about 124 degrees on the water. No kidding. The boat vapor lock. I poured cold water on the fuel pump and everything was fine. I took it back to the dealer and explained the problem. They called Indmar and explained the problem. I now have two fuel pumps in the boat now. Never ran into a problem since.
Tazz 07' Moomba LSV --Kicker Marine Amps (MX700.5 & MX350.4) 6 polk DB651 speakers, 4 MB Quartz Marine Speakers, 10" Boston Acoustic Sub, Z-5 Cargo Rack, Custom Speaker/Light Bar, modified ballast system, Custom LED Rings
Live life to the extreme and no less!!