In Dash Depth Finder wiring diagram?

[cmprint]

Does any have a wiring diagram for a stock in dash depth finder?
For 2005 Moomba Mobius with factory through hull transducer in dash depth gauge.

Thank you

[jmvotto]

I should have it at home. in the box.

i will try and post it tonight

[cmprint]

Thank you!

[jmvotto]

cmprint,

sorry no instruction in the box from sc, justa puck, gauge and some wires.

email [email protected] he should be able to help

[cmprint]

After tracking down all the wires and checking all connections, and still only
-- display, I ordered a complete new Faria SS in white to match the factory gauge look.
Thanks for the help.

[cmprint]

Installed the Faria ss Chessepeak in white matches stock gauges perfectly. The in hull transducer installed very easy with a mount to inside hull with silicon, let it set overnight then installed transducer into the mount filled with non toxic RV antifreeze to create a non void reading through hull. Routed the new cable to the dash via the starboard side gunnel, much easier then under floor. Swaped fuel guage and stock depth locations, made the easiest choice since I fill up everytime before launch and prefer to read depth over fuel on the dash vs looking down by throttle control. Took the boat out yesterday and depth works at all speeds even in the green/brown waters of the Bay of Green Bay.

I highly recommend this guage if you need to install or replace your depth finder.