Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: new Carpet

  1. #1
    Join Date
    Apr 2007
    Location
    Las Vegas, Nevada
    Posts
    1,582

    Default new Carpet

    I was thinking of changing the carpet in my boat. After the first year of having the boat, the carpet was looking pretty trashed. This past week, I just came back from our Family trip to Don Pedro. When we got home, it was time to wax, and clean the entire boat. After vacuuming the carpet, it did not come back to life. I would like to change out the carpet with a little sturdier weave. My dad just purchased a 91' Sanger and that carpet looked way better than mine. Has anyone change the carpet out in their boats. I think that it will be a winter project that needs to be address.
    Tazz
    Tazz 07' Moomba LSV --Kicker Marine Amps (MX700.5 & MX350.4) 6 polk DB651 speakers, 4 MB Quartz Marine Speakers, 10" Boston Acoustic Sub, Z-5 Cargo Rack, Custom Speaker/Light Bar, modified ballast system, Custom LED Rings
    Live life to the extreme and no less!!

  2. #2
    Join Date
    Jan 2008
    Location
    Keuka Lake, NY
    Posts
    7,692

    Default

    A Day at the Lake...Priceless
    A Day in Powder...Endless


    Joe V
    2012 Möbius XLV~ Loaded & Exiled
    2007 Outback V ~ sold

  3. #3
    Join Date
    Nov 2003
    Location
    Land O Lakes, Florida
    Posts
    6,377

    Default

    Tazz, one issue with our LSV's is the carpet goes under the seat bases and up the insides. The factory puts the carpet in before they put the deck on. Thats going to be a big job. If you do undertake this project make sure to take lots of photos. My carpet is not holding up real well either and someday may want to change it out myself.
    Hey, Its Moomba time

    Its all about the dash - enjoy the dash, as that is your time between the dates
    13 Mobius LSV-sold
    08 Mobius LSV-sold
    03 Mobius LSV-sold
    life is about finding the balance between being a responsible adult and staying young at heart

  4. #4
    Join Date
    Apr 2007
    Location
    Las Vegas, Nevada
    Posts
    1,582

    Default

    I just want to change what can be seen. I really did not want to tackle the whole thing. The carpet in the cab and in the rear Locker is what I was thinking. Is this a project that I can do or should I send it to the professionals?
    Tazz 07' Moomba LSV --Kicker Marine Amps (MX700.5 & MX350.4) 6 polk DB651 speakers, 4 MB Quartz Marine Speakers, 10" Boston Acoustic Sub, Z-5 Cargo Rack, Custom Speaker/Light Bar, modified ballast system, Custom LED Rings
    Live life to the extreme and no less!!

  5. #5
    Join Date
    Aug 2009
    Location
    Montana
    Posts
    3,062

    Default

    why not buy and inlay and drop it in?

    2007 Moomba Outback - going, going, GONE
    2015 "NOT A MOOMBA"

    Why Not? Play Hard! Get wet

  6. #6
    Join Date
    Apr 2008
    Location
    California
    Posts
    2,840

    Default

    Tazz, shoulda reminded me you were at Pedro! I forgot all about it

    A few thoughts here on this subject;
    • Replacing carpet yourself is no big deal, did it on another boat no problem. The big pain is pulling up the old and removing all the glue so you get a nice smooth install.
    • On an LSV IF i were to do it I would probably cut the carpet flush with the rubber molding around the seat bases. I doubt that after gluing carpet down you'd be able to push excess under it.
    • An overlay is good, it keeps the carpet clean for the most part and is easy to remove and hose off. That's what i do with mine.
    2007 Mobius LSV

  7. #7
    Join Date
    Jun 2009
    Location
    Chester, SC
    Posts
    169

    Default

    Replaced everything in mine. Carpet and upholstery. 1600.00 for everything. Trouble is finding a shop that will do it that cheap. I had to search far and wide, and wound up finding one within 20 miles.

  8. #8
    Join Date
    Apr 2007
    Location
    Las Vegas, Nevada
    Posts
    1,582

    Default

    Sorry about that Razz. We already made our reservations for next year.

    The rubber piece that is above the carpet, can that be removed?

    My upholstery is in perfect condition. I just want to change out the carpet. I think that I only need the parts that are visible. The carpet under the seats and hidden away, only gets seen when I remove the seat. The other carpet is trashed. No matter what I do, I can not get it to stand up. It is as flat as a board right now.
    Tazz 07' Moomba LSV --Kicker Marine Amps (MX700.5 & MX350.4) 6 polk DB651 speakers, 4 MB Quartz Marine Speakers, 10" Boston Acoustic Sub, Z-5 Cargo Rack, Custom Speaker/Light Bar, modified ballast system, Custom LED Rings
    Live life to the extreme and no less!!

  9. #9
    Join Date
    Jan 2008
    Location
    Pensacola, FL
    Posts
    1,585

    Default

    I think I would cut the carpet about 3" away from the outside edge. Then have carpet made to fit the entire area and attach with snaps. Then you have removable carpet that you can clean and dry. When you put it down, if there is any gap, the old carpet that is still down will fill that gap. Also, the snaps could be installed into the old carpet strip remaining and be barely visible.
    Just a thought.
    Last edited by maxpower220; 07-01-2010 at 02:48 PM.
    1997 MasterCraft 205

    2008 Moomba Outback
    1999 MasterCraft Sportstar OB
    1992 MasterCraft 205
    1999 Malibu Response LX
    1987 Marlin Magnum Skier

  10. #10
    Join Date
    Jan 2008
    Location
    Tallahassee, FL
    Posts
    14,071

    Default

    That's a darn good idea. The old carpet should be strong enough near the edges to hold the snaps.
    My Mom said I'm not allowed to get wet!
    2008 LSV (sold)
    2000 Outback LS (sold)
    LLTR!!!!!!!!



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •