Results 1 to 1 of 1
Thread: Rad-a-cage bolts
07-29-2004, 12:05 AM #1
I have a 1999 Mobius with a Rad-a-cage tower that was installed aftermarket by the dealer. I have to fold this tower a couple of times a week. I do this by removing the large allen head bolts that connect to the mounting brackets in the front and fold it backwards.
PROBLEM: The bolts are starting to gouge the threads in the tower arm and/or the mounting bracket. Apparently these are aluminum and the bolts are stainless?? Because the bolt threads really load up with the surrounding material but I can eventually force the bolts out by unscrewing them. Then I have to take a small chisel to the threads to clean them up. This leaves the threads on the bolt a little dinged up and more prone to galling the next time they are used. This does not happen every time so not sure what is root cause.
REQUEST: I need to know the specs for the bolts, size, material, strength, so I can get a couple new bolts. Could use some ideas on the best place to buy them. Are there other options? A new tower is not an option at this time.
Any help on this would be greatly appreciated.
DaveIf you believe something to be true, it will be - in it's consequences.
2009 MasterCraft ProStar 197 - DD - 5.7L - 325HP - Zero Off
By deeluk in forum Service & RepairReplies: 3Last Post: 06-25-2007, 06:49 PM
By Ghostrider in forum Service & RepairReplies: 4Last Post: 08-02-2006, 01:59 AM
By clark in forum General ChatReplies: 2Last Post: 09-02-2005, 04:21 PM
By mobiusLSV05 in forum Service & RepairReplies: 9Last Post: 07-30-2005, 07:13 PM
By mdrsdr in forum Boat OwnersReplies: 0Last Post: 04-14-2003, 12:06 PM