Results 1 to 4 of 4
Thread: Fitting Size
-
06-13-2010, 08:40 PM #1
Fitting Size
This might have already been posted, but I had trouble searching it.
Does anyone know the stock ballast quick connect fitting size that screws into the rear ballast bags on an 09 LSV?
I believe the fitting are two different sizes for fill line and drain line. Looking on WakeMakers website there seems to be a 3/4" fitting and a 1" fitting.
Would I need one of each size to connect my 750# FatSac?
After talking with Wakemakers it was determined that the 09+ balast has a 1" fitting for the fill/drain line and a 3/4" fitting for the vent line.
Thanks.Last edited by BWeber; 06-15-2010 at 03:58 PM.
-
06-13-2010, 09:06 PM #2
If you don't get your answer on here, call Wakemarkers and leave a message. Like everyone says, they are a small and extremely busy operation but I've always had Jason call me back the same day and usually within a couple hours of my messages.
-
06-13-2010, 10:16 PM #3
-
06-13-2010, 10:36 PM #4
08 are 3/4"