Results 1 to 7 of 7
Thread: hole saw size?
-
05-21-2010, 08:52 AM #1
hole saw size?
What is the hole saw size for the 3/4" thru hull ballast drains. is it 3/4" or 1"
anyone who has cut these holesor replaced the thr-hull fittings.
thxA Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
-
05-21-2010, 09:01 AM #2
I cut a new threw hull fitting Saturday night for the new nose bag i have. I used a 1inch hole saw. I kept with the 3/4 fittings so they would match.
Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]
-
05-21-2010, 09:05 AM #3
Mike,
Thank you..A Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
-
05-21-2010, 11:24 AM #4
I think it depends on the fittings. I'm pretty sure that the Stainless fittings I used had a 1 3/8 cutout, for a 3/4 fitting.
2013 Outback V
-
05-21-2010, 11:29 AM #5
WOW thats a large hole, but i have the standard thru-hulls. I have a black stripe so they kinda just disapear
A Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
-
05-21-2010, 11:34 AM #6
Oh, yea. The standard size is 1" - I know this because I had to enlarge them 3/8, what a PITA!
2013 Outback V
-
05-21-2010, 03:56 PM #7