Results 1 to 10 of 22
Thread: 2005 Outback Slalom Wake
Threaded View
-
04-25-2010, 03:54 PM #1Member
- Join Date
- Mar 2010
- Location
- Sonoma County, CA
- Posts
- 54
2005 Outback Slalom Wake
I've been getting my boat dialed in and thought I'd shoot some pictures of the slalom wake. The boat is set up without a tower, 1/2 tank of gas, rear seat in, OJ 4-blade 13 X 13 prop, driver plus skier and observer on board. Pics are at 30, 32 and 34 mph.
outback30mph.jpg
outback32mph.jpg
outback32mph2.JPG
outback34mph.jpg
outback34mph2.JPG
The other mod I did was insert a couple of small stainless steel washers along the rear wake plate mount. The affect of this is canting the plate downward a degree or two. I think this helps lighten the rear of the boat just a bit without affecting the handling.Last edited by markcr; 04-25-2010 at 08:16 PM.