Results 1 to 10 of 11
Thread: Rub Rail Question
Hybrid View
-
04-21-2010, 10:25 AM #1Junior Member
- Join Date
- Dec 2007
- Location
- Nampa, ID
- Posts
- 29
Rub Rail Question
I have a 2007 LSV and am looking to switch from the rubber rub rail to the stainless rub rail. Has anyone done this yet and if so where did you order from and how difficult was it?
Don't need nothin but a good time!!!!
-
04-21-2010, 10:41 AM #2
I here it's a PIA
-
04-21-2010, 11:15 AM #3
Do a search on "stainless" and "rail". Moombadaze was looking at doing this and there was a discussion about it in the last 3-4 months or so. Good luck!
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
04-21-2010, 08:52 PM #4
-
04-21-2010, 09:06 PM #5
Rubrails are no fun with rubber, i can't imagine the pain in the rear a stainless one would be.
2007 Mobius LSV
-
04-21-2010, 10:03 PM #6Senior Member
- Join Date
- Oct 2007
- Location
- Panama City Florida
- Posts
- 1,798
Check out the pictures of our LS on here. It has the stainless rub rail and it looks awesome!!!
There is a picture here of 2 moombas both blue one with it and one without it so you can compare and see what you like.
Oh and having used a similiar product on cars I don't think it would be that difficult.
https://forum.moomba.com/showthread.php?t=10822&page=4