Results 1 to 10 of 16
-
04-20-2010, 11:39 AM #1Member
- Join Date
- Apr 2010
- Location
- Eastern Washington
- Posts
- 97
Please help with new prop recommendation!
Woohoo, first post! I hate to clutter the boards with another prop question but I had difficulty finding the answer using the search function.
I have a 2007 Mobius LS DD with the stock prop. We need a little bit more holeshot for wakeboarding and surfing this year. I just got off the phone with both Acme and OJ. The props recommended to me were the ACME #913 and the OJ #304. Does anybody have experience with these props and care to comment? Thanks!
-
04-20-2010, 11:49 AM #2
Well i'm questioning both Acme's and OJ's call. The Acme 913 is lited on their web site as 13x10.50 .060 cup 1" LH rotation. I could be wrong but i though all SC boats were 1 1/8 LH rotation, even the LS. The OJ #304 is listed as 13x11 .090 cup 1" as well. These are all 3-blade as well. Maybe some of the DD guys can chime in here
2007 Mobius LSV
-
04-20-2010, 12:48 PM #3Member
- Join Date
- Apr 2010
- Location
- Eastern Washington
- Posts
- 97
Yeah I didn't run across mention of either one of these part numbers in relation to our boats. Anybody have experience with these two props?
Last edited by bbyquist; 04-20-2010 at 01:36 PM.
-
04-20-2010, 12:57 PM #4
I believe the DD's have a 1" shaft, they are correct. the VD's have a 11/8"shaft
Last edited by DOCDRS; 04-20-2010 at 12:59 PM.
09 21v LAUNCH
99 Outback LS. Sold
run your engine after you change your oil
68 th Member. WS420,HSE Revolution, OJ 466, Acme1157,1100 sacs,Kicker HLCD's n IX500.4, Supra Coolies
Doug
-
04-20-2010, 01:02 PM #5
zegm got a new 4 blade prop for his 2008 LS that he is very happy with. Check his posts for the specs. That is probably the one you want.
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
04-20-2010, 01:06 PM #6
Talk to Eric Johnson at Johnson Propeller. He knows his stuff and if he says it'll work - It'll work!!
Best if you know RPM and Speed of your existing prop.
2007 Moomba Outback - going, going, GONE
2015 "NOT A MOOMBA"
Why Not? Play Hard! Get wet
-
04-20-2010, 01:26 PM #7
The DD uses a 1" shaft, thus my suggestion for a 13 X 11 LC 1" 3-blade which is a good propeller for the DD 1:1 transmission wakeboard application. You could also try the 13 X 13 LC 1" FORCE 4-blade.
Eric Johnson
Johnson Propeller Co., Inc
OJ PROPS 800-359-9730
-
04-20-2010, 01:28 PM #8
I was wondering too. while out doing my break in I wasn't too happy.....I have a 13x13 3 blade.....atleast that is what the numbers look like. and if i remember correctly i was told by a fellow at oj prop i would want a 14x14
-
04-20-2010, 01:31 PM #9
The DD boats with the 1:1 transmissions cannot run the 14.25" dia. props.
Eric Johnson
Johnson Propeller Co., Inc
OJ PROPS 800-359-9730
-
04-20-2010, 01:35 PM #10Member
- Join Date
- Apr 2010
- Location
- Eastern Washington
- Posts
- 97
Thanks Eric! My bad, I was confused after reading other recommendations regarding V-drives and other applications.