Page 1 of 3 123 LastLast
Results 1 to 10 of 26
  1. #1
    Join Date
    Sep 2010
    Location
    Lake wallenpaupack PA
    Posts
    872

    Default G3 timer adjustment

    Not sure if this was ever put back up when the smeckle deleted all his posts. I had a copy so hopefully this works for others


  2. #2
    Join Date
    Sep 2010
    Location
    Lake wallenpaupack PA
    Posts
    872

    Default


  3. #3
    Join Date
    Feb 2012
    Location
    St. Albert, Alberta, Canada
    Posts
    170

    Default

    Thanks for putting this up. Changing the timer time is easy now, but I've got a few questions. If on a factory GIII all the bags are 400lbs, why is the front timer set to 3 mins? Should it not be set to 4.5 mins like the back? Also, I just upgraded to 750's in the rear, what should I set the timers to to fill them on a factory pumps?
    2010 MOOMBA LSV
    340 CAT
    ACME 1235
    3100#'s




  4. #4
    Join Date
    Mar 2011
    Location
    Belton, Texas
    Posts
    2,607

    Default

    Good question Krak. I also just upgraded to 750's and will have to adjust


    Sent from my iPhone using Tapatalk
    Jason

    Go Hard or Go Home.......it's MOOMBA time!!

    2009 Moomba Mobius LSV

  5. #5
    Join Date
    Jan 2008
    Location
    Keuka Lake, NY
    Posts
    7,692

    Default

    Wouldnt you just fill the new bag. 3 minutes then. Hit the fill switch again and count the time until it over flows out the thru hull. NOw got back and adjust the timers..

    Let me know on the 750 as well..I would guess 8 minutes.
    Last edited by jmvotto; 04-13-2012 at 10:12 PM.
    A Day at the Lake...Priceless
    A Day in Powder...Endless


    Joe V
    2012 Möbius XLV~ Loaded & Exiled
    2007 Outback V ~ sold

  6. #6
    Join Date
    Mar 2011
    Location
    Belton, Texas
    Posts
    2,607

    Default

    I filled the new bags up, or close to, tonight with two hits of the switch. Let it sit for about two minutes before flipping to fill the second time. I'll have to get around to just resetting soon I suppose
    Jason

    Go Hard or Go Home.......it's MOOMBA time!!

    2009 Moomba Mobius LSV

  7. #7
    Join Date
    Feb 2010
    Location
    Canton, Ga / Lake Lanier
    Posts
    1,600

    Default

    I tried these instructions several times and couldn't get it to go into program mode. So since boat was dropped off at the dealer I'm having them do this...


    Sent from my iPhone using Tapatalk
    SOLD! 2011 Mobius LSV 325HP EFI
    Digital Cruise Pro, Wakeplate, Kenwood KM550U and KCA-RC107MR x2, Kicker ZXM700.5, Kicker 6.5 Cabins, 10'' Kicker CompVT sub, Wetsounds SYN 4, Wetsounds REV10s, Wetsounds WS420Q, Gravity VI Surf Ballast, Acme 537

    Board: '12 LF Harley (Monster) 139
    Her Board: '11 Ronix Krush 128
    Kids Board: '13 Ronix Vision 120
    Skate: LF Faction 44
    Surf: LF Custom Quad & XXX


    Tow Rig:
    2011 Toyota Tundra CrewMax TRD Magnetic Grey
    3/1 Truxx Lift, and some other stuff...

  8. #8
    Join Date
    Sep 2010
    Location
    Lake wallenpaupack PA
    Posts
    872

    Default

    Quote Originally Posted by E4NASH View Post
    I tried these instructions several times and couldn't get it to go into program mode. So since boat was dropped off at the dealer I'm having them do this...


    Sent from my iPhone using Tapatalk

    I used these for my 2010 lsv and it worked. It is a pita though u need to follow them to the T

  9. #9
    Join Date
    Feb 2010
    Location
    Canton, Ga / Lake Lanier
    Posts
    1,600

    Default

    I found that my boat has a breaker by the batteries and then one in the engine bay labeled ballast. I tripped both of them in different combinations and tried it and could never get the pumps to stop turning on and be in program mode. It's probably something simple I missed.

    Does the 2010 have the reversible pumps like my 2011?

    *Side note*...I need to get some vent lines plumbed in this summer. I guess that's three more holes...


    Sent from my iPhone using Tapatalk
    SOLD! 2011 Mobius LSV 325HP EFI
    Digital Cruise Pro, Wakeplate, Kenwood KM550U and KCA-RC107MR x2, Kicker ZXM700.5, Kicker 6.5 Cabins, 10'' Kicker CompVT sub, Wetsounds SYN 4, Wetsounds REV10s, Wetsounds WS420Q, Gravity VI Surf Ballast, Acme 537

    Board: '12 LF Harley (Monster) 139
    Her Board: '11 Ronix Krush 128
    Kids Board: '13 Ronix Vision 120
    Skate: LF Faction 44
    Surf: LF Custom Quad & XXX


    Tow Rig:
    2011 Toyota Tundra CrewMax TRD Magnetic Grey
    3/1 Truxx Lift, and some other stuff...

  10. #10
    Join Date
    Jan 2008
    Location
    Keuka Lake, NY
    Posts
    7,692

    Default

    Quote Originally Posted by E4NASH View Post
    Does the 2010 have the reversible pumps like my 2011?

    *Side note*...I need to get some vent lines plumbed in this summer. I guess that's three more holes...


    Sent from my iPhone using Tapatalk
    You should have vent lines for the GIII
    A Day at the Lake...Priceless
    A Day in Powder...Endless


    Joe V
    2012 Möbius XLV~ Loaded & Exiled
    2007 Outback V ~ sold

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •