Results 51 to 60 of 64
Thread: Heater Install in 2006 LSV
-
09-07-2010, 09:44 PM #51
162 - Here is how I circulate antifreeze. - Deerfield
2007 Outback - SOLD June 2016
2012 RAM Crew Cab
2015 Subaru Forester
Stuart
"When you first start out with something new, you're always a little uptight." - Don Rickles
-
09-08-2010, 06:54 AM #52
-
09-08-2010, 07:53 AM #532007 Outback - SOLD June 2016
2012 RAM Crew Cab
2015 Subaru Forester
Stuart
"When you first start out with something new, you're always a little uptight." - Don Rickles
-
09-08-2010, 06:01 PM #54Senior Member
- Join Date
- Aug 2008
- Location
- Cottage Grove, MN
- Posts
- 780
between Cab, csmsk, and jester, I've seen the heater hoses connected to the engine at different points. Csmsk has the temp sensor connected to the supply hose in this thread https://forum.moomba.com/showthread.php?t=9940, and jester has one hose connected right by the oil dipstick in this thread https://forum.moomba.com/showthread.php?t=9877&page=2.
What is the key deciding factor for deciding where to install the supply and return hoses for the heater?2006 Outback V - Gone
2008 LSV - Gone
2013 other brand
-
09-09-2010, 09:36 AM #55
-
09-09-2010, 09:49 AM #56Senior Member
- Join Date
- Aug 2008
- Location
- Cottage Grove, MN
- Posts
- 780
Cab - another dumb question - I'm guessing that I would order the 12V unit and not the 24V unit, is that right?
2006 Outback V - Gone
2008 LSV - Gone
2013 other brand
-
09-09-2010, 12:46 PM #57
-
09-09-2010, 03:21 PM #58
-
10-03-2010, 04:45 PM #59
driver
what about the driver heat vent, or is he heater with the thrill of driving
-
10-04-2010, 07:39 PM #60