Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 39
  1. #21
    Join Date
    Apr 2008
    Location
    California
    Posts
    2,840

    Default

    2007 Mobius LSV

  2. #22
    Join Date
    Jul 2008
    Location
    Des Moines, IA
    Posts
    3,237

    Default

    Well if it's good enough for Sled... I'm going to pick up some other radiator hose though. The stock stuff wont get as far onto the barb fitting as I'd like. Other than that, I think this will work great.

    Razz, thanks a TON!
    Attached Images Attached Images

  3. #23
    Join Date
    Apr 2008
    Location
    California
    Posts
    2,840

    Default

    No prob, looks good!
    2007 Mobius LSV

  4. #24
    Join Date
    Dec 2006
    Location
    Tigard, Oregon
    Posts
    3,017

    Default

    Darn you Razz! I've been putting off buying this strainer for the last 3 years but finally ordered one about two weeks ago at the same time that I ordered the heater. Then a few days letter, you tell us about your find. I paid $52 for mine and it didn't even come with the chrome rings!

    I bought 90 degree elbows for mine though (I see you went with straight thru fittings) and am going to install it like the factory does, per the pic below that Jesse posted in another thread. I think it will make it easier to access the bowl this way.

    Al

    2006 Mobius LSV

  5. #25
    Join Date
    Jul 2008
    Location
    Des Moines, IA
    Posts
    3,237

    Default

    Thanks for posting that pic, Cab. It's got me wondering if mounting it that way has anything to do with it being above the draft level. If the bowl were to crack, or if you simply wanted to clean it out while on the water, I wonder if it's high enough to keep you from taking on water. My location I'm not so sure...

  6. #26
    Join Date
    Jun 2009
    Location
    port washington, ohio
    Posts
    656

    Default

    cab and brain thanks for the pics makes it so much easier seeing some pics of it done first!

    razz thanks for letting us know of your find and breaking it down for lazy people like me!
    gonna order mine on monday

  7. #27
    Join Date
    Apr 2008
    Location
    California
    Posts
    2,840

    Default

    Quote Originally Posted by cab13367 View Post
    Darn you Razz!
    LOL! Sorry Al, I'll make it up to ya some how!

    Btw, how exactly is that connected from the Vdrive to the bowl? I can't tell in the pic.
    2007 Mobius LSV

  8. #28
    Join Date
    Dec 2006
    Location
    Tigard, Oregon
    Posts
    3,017

    Default

    Quote Originally Posted by Razzman View Post
    LOL! Sorry Al, I'll make it up to ya some how!

    Btw, how exactly is that connected from the Vdrive to the bowl? I can't tell in the pic.
    Razz,

    It's connected to the same fitting as our boat except the fitting is pointed straight up instead of towards the front of the boat.

    Al
    Al

    2006 Mobius LSV

  9. #29
    Join Date
    Apr 2008
    Location
    California
    Posts
    2,840

    Default

    Ahhh so the factory puts a brass/bronze 90 degree fitting at the Vdrive inlet, got it.
    2007 Mobius LSV

  10. #30
    Join Date
    Dec 2006
    Location
    Tigard, Oregon
    Posts
    3,017

    Default

    Installed my strainer today. Below is a link to the how-to thread on it:

    https://forum.moomba.com/showthread....2440#post92440
    Al

    2006 Mobius LSV

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •