Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1
    Join Date
    Jan 2006
    Location
    Jacksonville, FL
    Posts
    608

    Default Malco Vinyl cleaner

    I read some about this product on thsi site and read a lot of great things about it on other wakeboarding forums as well. I ordered me a gallon of it yesterday and am just waiting on it to arrive. I have a question for people that have used it already. Should i just spray it directly on the vinyl and proceed to wipe it down or should I wet the vinyl first with water and then spraythe malco on the vinyl?

  2. #2
    Join Date
    Apr 2008
    Location
    California
    Posts
    2,840

    Default

    You can use it direct but do not let it run down the vinyl or gelcoat without immediately wiping up. Use a medium stiffness brush to work it in and get the grit out. Also keep it off of the britework (aluminum, stainless). I pull the cushions and do them outside the boat and cover stuff inside to keep it where i want it. It sounds like a pain but it's easy. Make sure to condition with a UV protectant afterwards.
    2007 Mobius LSV

  3. #3
    Join Date
    Jan 2006
    Location
    Jacksonville, FL
    Posts
    608

    Default Thanks

    I will make sure to use my 303 protectant. Thanks

  4. #4
    Join Date
    Jan 2008
    Location
    NorCal
    Posts
    332

    Default

    Has anyone whos used this stuff tried Exquisite? Just currious cause i've been using the Exquisite combined with 303 for a while now and it works awsome, but if theres something better than im down for that for sure.
    06 Outback V

  5. #5
    Join Date
    Apr 2008
    Location
    California
    Posts
    2,840

    Default

    There have been a few on WW who've used the Equisite then switched to Malco and noticed better results.
    2007 Mobius LSV

  6. #6
    Join Date
    Jan 2008
    Location
    NorCal
    Posts
    332

    Default

    Thanks. Im going to give it a try after im done with the Exquisit I have left.
    06 Outback V

  7. #7
    Join Date
    Jun 2009
    Location
    port washington, ohio
    Posts
    656

    Default

    is the malco just for stains already there or just normal cleaning of the vinyl?

  8. #8
    Join Date
    Apr 2008
    Location
    California
    Posts
    2,840

    Default

    It's great for the spring cleaning, dingy looking vinyl or stains. Once you have it looking new then revert to your normal cleaner & 303
    2007 Mobius LSV

  9. #9
    Join Date
    Jul 2008
    Location
    Flowery Branch Georgia
    Posts
    201

    Default

    I used the exquisite untill I tried the Malco. The exquisite is good stuff but the malco is better Do 1/2 a seat with exq and the other side with malco you will see the difference. I use 303 to protect the cleaned vinyl. Once you get clean you can mix 25% cleaner 75% water to use as a end of the day wipe down cleaner.

  10. #10
    Join Date
    Jun 2009
    Location
    port washington, ohio
    Posts
    656

    Default

    i never seen it sold in a store is it something you have to order online or where ya get it at
    i checked at auto zone walmart and lowes with no luck

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •