Results 1 to 5 of 5

Hybrid View

  1. #1

    Default Help Wiring Lift Motor to Switch

    I am putting in a new lift and was given a used Magnetek 3/4 hp motor and switch to use to raise boat up and down. I have searched for a wiring diagram and can't seem to find one. The motor has 6 wires coming from it. White, Black, Red, Blue, Orange & Yellow.

    The switch has 5 wires. White, Black, Red, Orange, and Green. I tried matching colors and the motor would only run in one direction. What is the correct way to wire it up?

  2. #2
    Join Date
    Mar 2003
    Location
    Springfield Missouri
    Posts
    3,391

    Default

    There may be someone familar with this motor that may help. Can you provide the information on the motor label plate?
    1998 Mobius
    310 HP PCM
    SOLD

  3. #3
    Join Date
    Jul 2008
    Location
    Snellville, GA & Lake Sinclair
    Posts
    8,419

    Default

    the folks at Lunmar helped me when I wired up mine. here is a link to the wiring diagram and their phone number is on the top right

    http://www.lunmarboatlifts.com/index...lay/page_ID/21

  4. #4

    Default

    Here are some pics of the motor and switch. I know the switch is wired correct because it came off a working lift. So the question is related to wiring it to motor
    Attached Images Attached Images

  5. #5

    Angry

    Here are a few more pics. And the last one is for the guys up north that doesn't belive that it snows in Texas, in FREAKING March
    Attached Images Attached Images

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •