Okay, the valves and manifold came in today so I took a couple photos just to show everyone. My boat is at the dealership getting the '08 GG3 system installed with the Orbit valves and factory manifold (this system was negociated in with the boat). My plan is to get the boat on the water, remove the fitting from the sac and fill a 5 gal bucket and time it with just the one Orbit valve. Then I will turn on all 3 Orbit valves and do the same test to see the difference. A week or two later I will install this new manifold with the 3 Irritrol valves and perform the same test. I will send Jesse the numbers so he can compile them into the ballast chart he has created for us.



Sorry about the cat