Page 1 of 3 123 LastLast
Results 1 to 10 of 26
  1. #1
    Join Date
    Jan 2008
    Location
    NorCal
    Posts
    332

    Default Outback V Tsunami upgrade

    Just thought id post this up since there was some question as to weather these pumps would fit in a smaller space. I put a couple differant manifolds togeather just to see how they would work.

    Heres the first one
    Attached Images Attached Images
    Last edited by byronkoz; 03-14-2010 at 05:38 PM.
    06 Outback V

  2. #2
    Join Date
    Jan 2008
    Location
    NorCal
    Posts
    332

    Default

    And the one I decided to go with
    Attached Images Attached Images
    06 Outback V

  3. #3
    Join Date
    Jan 2008
    Location
    NorCal
    Posts
    332

    Default

    And installed
    Attached Images Attached Images
    06 Outback V

  4. #4
    Join Date
    Jan 2008
    Location
    NorCal
    Posts
    332

    Default

    Vented loops
    Attached Images Attached Images
    Last edited by byronkoz; 03-14-2010 at 05:37 PM.
    06 Outback V

  5. #5
    Join Date
    Mar 2008
    Location
    Vancouver WA
    Posts
    3,034

    Default

    Looks snuggish in there! Nice work. Thats a great place for those vents.
    I noticed you have the same interior speakers as me. Nice choice.

    Nice Heiny BTW


    PWI as usual...

  6. #6
    Join Date
    Oct 2009
    Location
    Wisconsin
    Posts
    339

    Default

    Tight fit!!! Not easy to work in such a small area. Excellent job!
    Did your boat come stock with GIII? If not, what are you using for drain pumps? Post more pics once you're done

  7. #7
    Join Date
    Jan 2008
    Location
    Tallahassee, FL
    Posts
    14,071

    Default

    Very slick. Good use of your space.
    My Mom said I'm not allowed to get wet!
    2008 LSV (sold)
    2000 Outback LS (sold)
    LLTR!!!!!!!!



  8. #8
    Join Date
    Jan 2008
    Location
    NorCal
    Posts
    332

    Default

    Quote Originally Posted by newty View Post
    Looks snuggish in there! Nice work. Thats a great place for those vents.
    I noticed you have the same interior speakers as me. Nice choice.

    Nice Heiny BTW
    Yeah I have 4 of the same but 6X9's on the tower, love them.
    Love the Heiny's too. lol
    06 Outback V

  9. #9
    Join Date
    Jan 2008
    Location
    NorCal
    Posts
    332

    Default

    Quote Originally Posted by 2007 Outback V View Post
    Tight fit!!! Not easy to work in such a small area. Excellent job!
    Did your boat come stock with GIII? If not, what are you using for drain pumps? Post more pics once you're done
    Nope it came with the GI. Im using the stock empty pump for the ski locker sac and Tsunami's for the rear sacs.
    06 Outback V

  10. #10

    Default

    Thanks for the pics, just so you (and anyone else that's interested) know, Tsunami pumps with the long inlet use straight thread, so you can cut that down with a hack saw to 3/4" of an inch and it will still thread into your fittngs fine. That makes it a little easier to fit everything into cramped bilge compartments.

    Also, ideally you should use bronze fittings for this application and not brass. Brass will undergo galvanic corrosion at a much faster rate, in fact we've seen brass ball valves fail in less than a year. If it's past the ball valve you can switch to plastic, which will save you quite a bit of weight and money.

    Nice install though, can't wait to see the finished product!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •