Results 1 to 4 of 4
Thread: New Decal Install
-
03-05-2010, 01:41 PM #1
Senior Member
- Join Date
- Jan 2008
- Location
- NorCal
- Posts
- 332
New Decal Install
Just got the new decalls from the dealer and im puting them on myself. After doing a search im still not sure whats the best way? Soap and water? Anyone doen this recently that can give me some tips? Thanks.
06 Outback V
-
03-05-2010, 01:54 PM #2
Senior Member
- Join Date
- Sep 2009
- Location
- Copperas Cove, TX
- Posts
- 1,761
Anything with vinyl graphics, large or small, I've had great success with dishsoap and water in a spray bottle.
-
03-05-2010, 03:24 PM #3
Senior Member
- Join Date
- Jul 2008
- Location
- Des Moines, IA
- Posts
- 3,237
I did mine last year. A spray bottle full of water with 2 small drops of dish soap worked perfect for me. I marked the far edges and center with blue painters tape. Sprayed the back of the vinyl and the boat, stuck down the middle and worked the water out towards the edges with a bondo applicator (soft plastic putty knife.)
-
03-05-2010, 03:59 PM #4
Senior Member
- Join Date
- Jan 2008
- Location
- NorCal
- Posts
- 332
Great im sure I can handle it then. Thanks for the advice!
06 Outback V
Reply With Quote
