Results 1 to 2 of 2
Thread: Carpet Trim
-
02-24-2010, 04:11 PM #1
Carpet Trim
Not to innundate the sevice and repair board with posts, but that's what I'm gonna do!
A small portion of the plastic carpet trim that runs around the boat is delaminating from the fiberglass. I can't tell if the trim is seperating from the adhesive back, or if the adhesive is coming off of the fiberglass. It's a small section, maybe an inch or two, and it's in the rounded corner of the bow. I thought about getting some two part epoxy in there and setting it for good, but thought I'd get other ideas if you guys had any.2015 Supra SC400
08 LSV - Sold
Go big, or go home.
-
02-24-2010, 04:13 PM #2
I use two part epoxy for stuff like that all the time. It's cheap and works great.
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!