Results 81 to 90 of 95
Thread: Monster Tower Cargo Rack Install
-
04-12-2011, 04:17 PM #81
Nicely done!
Kraig - 2010 Outback V
-
04-12-2011, 06:40 PM #82Senior Member
- Join Date
- Sep 2010
- Location
- Lighthouse Point, FL
- Posts
- 211
Again, thanks for the help
ToddREALLY????
-
06-05-2011, 01:17 PM #83Senior Member
- Join Date
- Oct 2009
- Location
- Lockport, IL/Cloverdale, MI
- Posts
- 185
For those who used the krypt clamps, do these already have holes in them for the taco or do the holes need to be drilled into the clamp? Thanks.
2008 Outback V
-
06-05-2011, 03:35 PM #84Senior Member
- Join Date
- Sep 2010
- Location
- Lighthouse Point, FL
- Posts
- 211
No. You will have to drill and tap them yourself. Pretty simple to do and the tap is available at Lowes / Home Depot. but get two, youll probably break one....
REALLY????
-
06-05-2011, 10:19 PM #85Senior Member
- Join Date
- Oct 2009
- Location
- Lockport, IL/Cloverdale, MI
- Posts
- 185
Thanks 11, any suggestions on which screws to use.
2008 Outback V
-
06-06-2011, 08:54 AM #86
You will also need at least one 5/32 drill bit (more is better in case they dull or break). Also you will need a 10-24 Thread Tap to add thread to the mounting holes, I got mine from Sears. Then you will need 8 10-14 X 1/2 stainless screws (Lowes or Home Depot), and some LocTite (I used LocTite Red)
Look back at posts 60 & 61, they should list parts we used.Kraig - 2010 Outback V
-
06-06-2011, 10:53 AM #87Senior Member
- Join Date
- Oct 2009
- Location
- Lockport, IL/Cloverdale, MI
- Posts
- 185
Thanks KSmith, I knew I read it before but then thought I didn't...I kept on looking at post #60 but not #61. I apologize for asking when the excellent information was already provided. I still haven't decided what I am going to do, drill in tower or buy the clamps. I love the clamp idea, but the cost is a killer.
2008 Outback V
-
07-14-2011, 07:30 PM #88Senior Member
- Join Date
- Oct 2009
- Location
- Lockport, IL/Cloverdale, MI
- Posts
- 185
I finally installed the Monster cargo bimini a few weeks ago. I decided to drill the tower rather than use the clamps. So far we love it, more for the storage of boards than the shade it provides. Here is a pic of it installed, sorry, all i have, taken last weekend. That's my wife in the back with our little one in the red hat that you can barely see. Thanks for all of the input on the install.
2008 Outback V
-
07-15-2011, 04:41 PM #89
looks good bob!
2004 Moomba LSV Blue
-
07-19-2011, 09:48 PM #90