Results 1 to 3 of 3
Thread: Bimini Top
-
05-27-2004, 10:35 PM #1Member
- Join Date
- Mar 2004
- Posts
- 34
Bimini Top
I can't seem to get my bimini top to work. It seems that the tubes for the bimini are wider than the tower is. Therefore i can't get the bimini to go forward. Any ideas?
Brent Burtrum
-
05-28-2004, 10:51 AM #2Senior Member
- Join Date
- Mar 2004
- Location
- Wylie, Tx.
- Posts
- 212
Replying to Topic 'Bimini Top'
Mine was the same way. I just put a little more umph in it and it passes through. If you have a powder coated cage, just be careful as it will start to rub it down to the metal as mine did. I don't know of any quick fix off hand, that's just what I do.
MedicMedic151
06 Mobius XLV
-
06-07-2004, 01:54 PM #3Member
- Join Date
- Jul 2002
- Location
- Northern California (Seba
- Posts
- 91
Replying to Topic 'Bimini Top'
They do fit tight. When you undo the straps from the tower let the top lay back on the motor cover then bring it back through the tower. That seems to work best for me and it hardly hits the tower at all. Happy Boating.
Lake Bound
2002 Moomba Outback LS
Indmar, Carb
Similar Threads
-
forwarded bimini VS Bimini top
By mvd in forum General ChatReplies: 5Last Post: 10-27-2006, 01:13 PM -
Add a Bimini?
By Tiltboy in forum General ChatReplies: 16Last Post: 09-21-2005, 03:15 PM -
BIMINI
By Diegotoys in forum Moomba ClassifiedsReplies: 0Last Post: 07-06-2004, 11:01 PM -
Bimini Top
By medevac130 in forum General ChatReplies: 2Last Post: 06-12-2004, 05:49 PM -
Bimini Top
By tn_viper in forum Boat OwnersReplies: 2Last Post: 08-10-2002, 10:40 PM