Results 31 to 40 of 103
Thread: Another SeaDeck group buy
-
02-13-2010, 07:29 PM #31
Platform Size
Anyone know the correct Seadek pad to order for a 2009 LSV?? I was looking at the single piece ROO Logo, but I dont have my swim platform near by to measure.
-
02-14-2010, 09:24 AM #32
-
02-16-2010, 11:09 PM #33
-
02-17-2010, 01:24 AM #34
I bought mine on a group buy last fall and it was only a 2 color. Chuck said at that time they are still working out the bugs on the 3 color. Maybe the bugs are done worked out??
2007 Moomba Outback - going, going, GONE
2015 "NOT A MOOMBA"
Why Not? Play Hard! Get wet
-
02-17-2010, 01:30 AM #35
Just ordered mine last Friday. Of course I wanted the three color option too. Nope, all the bugs are not out yet. I was told it was a work in process with no set date of availability. Maybe by mid summer to sometime this fall, they were not sure. I still think I will be happy with just two colors. Still, I do admit that that three color prototypes are pretty slick.
-
02-17-2010, 03:09 AM #36Senior Member
- Join Date
- Nov 2009
- Location
- Murfreesboro, Tennessee
- Posts
- 206
When I called and talked with them I asked about the 3 colors and they said they would do it, but the red color I wanted was not UV protected and would fade in the sun. Also then the whole pad would not be warrantied.
I went with a black bottom and beach sand top with Moomba logo. I also bought a sheet of 5mm black for my trailer pads. I will post some pics when I get them.
-
02-17-2010, 12:37 PM #37
Yea!!! Long live the ROO!!
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
02-17-2010, 01:48 PM #38
-
02-28-2010, 12:50 PM #39
What all is involved in installing the pads?
-
02-28-2010, 12:52 PM #40
To install it you make sure the swim platfrom is completely free of any oils and cleaning agents of the such. Then you lay the pad down, Do Not Pull the non stick protective backing off at this point.
Then you use blue painters tape and tape 1 side of it into place, this way you can lift it like a lid.
When you have it peftectly aligned how you want it. Slowly peel the protective backing off, slowly as it can tear and its a real pain to get it started sometimes.
After you peel a foot or so off you can begin to lay the now sticky pad on the platform. Do this untill the whole pad is in place.
The reason for the pretape and making sure its aligned is because once that sticky pad touched the fiberglass platform, you will not be able to remove and fix it with out damaging the pad.
Realy simple to install just make sure its aligned.Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]