Search:

Also, on my latest screen issue, the dealer mentioned the transducer may have popped up while towing it back home. Upon checking, everything was fine and secure. I did pull the transducer out,...

I wish, I just had a similar issue in my 2016 Craz. Hours wouldn’t go past 250 and it’s apparently a well-known issue. Assuming your dealer is the same as mine, they will charge you an hour of...

No, the previous owner put in a 9000 lb lift.

Season firing up and I need/want to drop too much $ on a few things. I’d appreciate a code if there is one for wakemakers. Thanks!

I recently bought our boat and the dealer stored a few months thru the winter. The only upgrade we paid for was 1100# ballast. I thought the bag would fill the entire locker. The bag doesn't indicate...

I didn't want to go with wood, but after weighing options, I went with two 2x10s bolted together and covered with Overton's Malibu carpet (perfect fit). 2544425445

So, just got the boat and lift kit; same day. Thought lift was good to go, but then something terrible happened. The flat boards previously used for the pontoon broke, then I-beam rolled. �� ...

Thanks for the input. One last question, should I install the front/bow portion of the bunks higher than the rear (for drainage, etc.)? Or, is that the purpose of installing the front a little...

Thanks for the input! For longevity and piece of mind, I think I'm going to pay up a little bit and install the attached. 25342

25341. Current setup. Flipping up (8"), is that sufficient height? Optimal width b/w the two boards?

Last fall I purchased a '16 Craz. This is my 1st boat and recently moved to the lake. The lift is a 9k lb hi-tide 4 post lift, but with two flat carpeted boards as the previous owner had a pontoon....