Search:

Type: Posts; User: Engine Nut

Page 1 of 6 1 2 3 4

Search: Search took 0.09 seconds.

  1. We recommend replacing the on-engine filter...

    We recommend replacing the on-engine filter annually or every 300 hours, whichever comes first. Check the Supra Operator's Manual for their recommendation for the in-tank filter.
  2. There are actually two fuel filters but neither...

    There are actually two fuel filters but neither are the spin-on type you are used to. The primary filter is in the fuel tank as part of the fuel pump assembly. There is also an in-line filter on the...
  3. Replies
    5
    Views
    261

    The shifting transmission has a drain plug. It...

    The shifting transmission has a drain plug. It will be on the side of the transmission near the bottom you can drain from there or suck it out. The v-drive oil will need to be pumped/sucked out.
  4. Replies
    5
    Views
    261

    The info is in the Operator's Manual. The...

    The info is in the Operator's Manual. The shifting portion of the transmission, with the red dipstick, uses Dexron 3 or Dexron 6 automatic transmission fluid. The v-drive portion with the yellow...
  5. Replies
    5
    Views
    268

    With permission of the manufacturer, we changed...

    With permission of the manufacturer, we changed the oil that we install in the Walter v-drive to 15W40, the same oil we recommend for the engine. There has been no detrimental effect noticed from...
  6. You should have a cartridge style filter on your...

    You should have a cartridge style filter on your 2017 model engine.
  7. The hose barbs need to be 1 1/4" as the hoses are...

    The hose barbs need to be 1 1/4" as the hoses are 1 1/4" ID
  8. Replies
    12
    Views
    4,038

    The first year's manual for the Raptor engine had...

    The first year's manual for the Raptor engine had the oil capacity incorrectly stated at 6 quarts. The capacity in subsequent manuals was corrected to 8 quarts. Don't just dump in 8 quarts though....
  9. Replies
    28
    Views
    2,419

    The 400 and 440 Raptors use semi-synthetic or...

    The 400 and 440 Raptors use semi-synthetic or fully synthetic 5W30 meeting the API rating of SN. The old no synthetics for 100 hours does not apply to these engines. They are going to hold close to 8...
  10. Replies
    3
    Views
    243

    It probably got started crooked and it got...

    It probably got started crooked and it got cross-threaded. You might be able to clean it up with a file but if that doesn't work, you may have to get a new dipstick. The Indmar part number for the...
  11. Send me your e-mail address and I will send you...

    Send me your e-mail address and I will send you the information you need. My e-mail is lengelbert@indmar.com
  12. Replies
    2
    Views
    167

    The part number for the Indmar Branded version of...

    The part number for the Indmar Branded version of the Synthetic 50 is 872022 and it is sold by the quart. Check and see if your dealer has it in stock.
  13. Thread: Engine code

    by Engine Nut
    Replies
    3
    Views
    188

    SPN 707 FMI 3 is a low oil level indication....

    SPN 707 FMI 3 is a low oil level indication. Check your oil with the dipstick. If the oil level is OK, there is an oil level switch on the side of the oil pan. It is on the same side of the engine...
  14. Replies
    21
    Views
    1,106

    SPN 110 FMI 1 is related to the water flow sensor...

    SPN 110 FMI 1 is related to the water flow sensor and is an indicator only, it will not put the engine into power reduction. If you get that code keep an eye on the temp gauge. As long as the temp...
  15. ' The 556184 Pierburg pump is available ... we...

    '
    The 556184 Pierburg pump is available ... we have several hundred in inventory. We did have a supply issue with the Pierburgs last summer but that issue has been resolved.
  16. Replies
    40
    Views
    2,223

    [QUOTE=Bean;306311]I've tried dealer and both...

    [QUOTE=Bean;306311]I've tried dealer and both bakes and ski dim they both are telling me that the part is not available through indmar that I have to get it from the parts store but the one at the...
  17. Replies
    40
    Views
    2,223

    The fuel pump safety switch and the v-drive...

    The fuel pump safety switch and the v-drive switch work opposite of each other. The fuel pump switch is closed when the engine is running and there is oil pressure which allows the fuel pump to run....
  18. 11 lb. ft. is the magic number per the GM service...

    11 lb. ft. is the magic number per the GM service manual.
  19. If your engine dose not have catalytic converter...

    If your engine dose not have catalytic converter exhaust, I would recommend using conventional AC/Delco MR43LTS plugs gapped at .045.. Any catalyst engines should use platinum or iridium plugs. The...
  20. Replies
    15
    Views
    969

    The sensors behind the catalytic converters on a...

    The sensors behind the catalytic converters on a 2008 model are post catalyst temperature sensors. not oxygen sensors. The post cat sensors proved to be problematic and since they were not required...
  21. I assume this is a 5.7L engine ... correct? When...

    I assume this is a 5.7L engine ... correct? When you say overheating, how hot is it getting? Is it setting off the alarm? Remove the cap from the overflow bottle and let the engine run till the...
  22. Replies
    27
    Views
    2,498

    You really need to get with someone that has a...

    You really need to get with someone that has a scan tool. ROM limited to 2000 might just be an issue that is causing the ECM to limit the RPM to avoid damaging something.

    You have a throttle by...
  23. Replies
    2
    Views
    394

    The Indmar P/N for that dipstick is 903064. Any...

    The Indmar P/N for that dipstick is 903064. Any Indmar dealer can order one for you.
  24. Replies
    10
    Views
    926

    We use a wire reinforced hard-walled hose on the...

    We use a wire reinforced hard-walled hose on the suction side of the system to make sure that it does not get sucked flat by the raw water pump. Our P/N is 845004. It is sold by the foot. Your...
  25. Replies
    10
    Views
    926

    If you close the sea cock at the water inlet, the...

    If you close the sea cock at the water inlet, the raw water pump will pull anti-freeze into the system and push it through the raw water side of the engine's cooling system. We would recommend...
Results 1 to 25 of 142
Page 1 of 6 1 2 3 4