Search:

Type: Posts; User: bjrow

Page 1 of 5 1 2 3 4

Search: Search took 0.13 seconds.

  1. Great to see this site up and going again, a...

    Great to see this site up and going again, a great resource for all.

    Continuing on from the last post, had the boat out on the lake a couple of weeks ago and it all ran great!
    Spent about 2.5 hrs...
  2. Right, just in from doing the plugs and coil...

    Right, just in from doing the plugs and coil module.
    We've owned the boat from new, the plugs in it originally were marked as 41-101 and were gapped at 0.060", all 8 of them. The Moomba owners...
  3. Thanks for your suggestion, have trialled that...

    Thanks for your suggestion, have trialled that without success.
    Smells like unburnt fuel coming out the exhausts when running badly, figured I'd try the ignition stuff then if no good must be fuel...
  4. Thanks for your reply's. Yeah first time out...

    Thanks for your reply's.
    Yeah first time out this season and under lots of load it started to miss fire, load reduced ran fine.
    Replaced rotor, cap and leads, went out and miss fired about 45mins...
  5. Spark plug question for Indmar Assault in 2014 Moomba Mondo

    OK so 10 yrs on I'm finally doing the spark plugs and coil/module.
    have replaced the rotor, cap and leads, original leads probably ok and have kept as spares.
    The spark plugs are ACDelco 41-101 but...
  6. Replies
    4
    Views
    1,765

    Thanks for your replies. I put on a slightly...

    Thanks for your replies.
    I put on a slightly bigger diameter prop as we carry a bit of weight for surfing, that's probably made it a bit more noticeable then.
    Getting the boat level port and...
  7. Replies
    4
    Views
    1,765

    Steering Question

    We have a 2014 Moomba Mondo and when out of the water the steering wheel at the 12 o'clock position has the rudder straight and true however when in the water cruising at around 3000rpm the steering...
  8. Replies
    118
    Views
    21,711

    @HFarr Thanks for your comment, that stuff next...

    @HFarr
    Thanks for your comment, that stuff next to the coke can is dried mango after it's been originally soaked in sugar!
    Healthy but not....tastes great tho.
    Cheers BruceR, Melb AUS.
  9. Replies
    118
    Views
    21,711

    30809 Last time out for the season here, just...

    30809

    Last time out for the season here, just chillin' out.

    Hope your all getting ready for a great season there.

    Cheers BruceR, Melb AUS.
  10. @Bergermaister - Not as pretty as yours with the...

    @Bergermaister - Not as pretty as yours with the snow capped mountains in the background! Lake Eildon is fed from some snow melt from Mount Buller but too far away to see it and it's probably a hill...
  11. Wife was on the wakeboard, not bad for us oldies...

    Wife was on the wakeboard, not bad for us oldies (50yo and up).
    NO INVERTS tho!!! We'll leave that to the kids....
    Only the one Supra/Moomba dealer in AUS, RideAustralia.
    Mostly Malibu/Axis is...
  12. Riding a Moomba 2014 Mondo 25kg lead upfront, had...

    Riding a Moomba 2014 Mondo 25kg lead upfront, had it since new.
    Pic is of my wife with chest mount gopro.
    Saw maybe 4 boats for the whole day!
    That day was 24degC and sunny, since it's been 15 -...
  13. Finally a chance to get out on the Lake Downunder!

    30717

    Been so wet and cold, lake overfull, floods etc. and it snowed here 2 weeks ago! Supposed to be Summer here.
    Generally we're out latest mid Oct but a very different year this year.
    Took...
  14. Replies
    9
    Views
    2,280

    I've tried removing all 3 fins, while faster...

    I've tried removing all 3 fins, while faster still it became a bit too slippery sideways for my skill level at the time.
    Now with all back in and the extra weight in the boat it's a pretty easy...
  15. Replies
    9
    Views
    2,280

    Forgot to mention, this was with the Mondo manual...

    Forgot to mention, this was with the Mondo manual flow with stock ballast.
    We've since upgraded the bags a little and bought some lead and the orig fins are back in the HL, I mainly use the Ronix...
  16. Replies
    9
    Views
    2,280

    Completely agree with 2in2out with what I found....

    Completely agree with 2in2out with what I found.
    I'm 240ish lb so bring on the jokes.....
    With the two outer removed it was just enough to get going without the rope.
    It's nice to have to stooge...
  17. Replies
    9
    Views
    2,280

    Have you tried removing the outer 2 fins leaving...

    Have you tried removing the outer 2 fins leaving the centre one in?
    We did that and found it moved along nicely, we use the large surface and dig an edge in when we need to move the board around as...
  18. Yours is secured better than ours, we had the...

    Yours is secured better than ours, we had the brackets but no screws to the boat, just sorta flopped around.
    It moved enough that the wakeplate wires (2 of from the connector that run around behing...
  19. Yeah was a bit of a concern when we first had a...

    Yeah was a bit of a concern when we first had a look.
    We found the wires to the wakeplate had their insulation rubbed right thru and the +12v lead insulation about to become the same so while there...
  20. Meant to read 65AUD each. Cheers BruceR, Melb...

    Meant to read 65AUD each.
    Cheers BruceR, Melb AUS.
  21. Wish the impellers were 3 for 100 buck...

    Wish the impellers were 3 for 100 buck here.....more like 65AUD.
    Simple to change really although due to the pump mounting in close proximity to each other in different orientations we had to loosen...
  22. Thanks Bealaddison, will be interested to see...

    Thanks Bealaddison, will be interested to see what you find as a comparison.
    Yeah was thinking about the length of screws etc and have some the same as what's used in the rear panel fixings. While...
  23. Ballast impeller replacement and unsecured mounting plate

    Gidday from OZ.
    Was replacing the impellers in our x3 ballast pumps yesterday in our 14 Mondo and was a bit shocked to see that the board that the pumps and control gear mounts to was not secured in...
  24. Replies
    9
    Views
    1,926

    x3 on the Hyperlite Landlock suggestion. I'm 6ft...

    x3 on the Hyperlite Landlock suggestion. I'm 6ft and err..250lb and getting up is pretty easy. It's the go to board for all new comers and they all get the chance to get up and enjoy the ride. I've...
  25. Replies
    13
    Views
    5,605

    Thanks Sandm, will do believe me it'll be a long...

    Thanks Sandm, will do believe me it'll be a long 6 months, something we all share in common at different times.
    A few pics from our season at Lake Eildon;
    29619
    29620
    29621
    29622
    Cheers BruceR,...
Results 1 to 25 of 112
Page 1 of 5 1 2 3 4