Search:

I have the same exact problem with my '99 Outback LS. The problem for me was the actual thread. The vinyl was still good. I had my rear trunk sewn up last year and need to sew up all of the bow...

I would question how deep you are placing the trailer on the boat ramp. If it takes a lot of power to back off you are probably to shallow. Back the trailer down a little farther and ideally you...

Yes I have that same problem. Take one of the bolts out and go to Lowes/HD and get your self several lock washers. Go home and put the bolt through the handle the big flat washer that should...

It would probably be cheapest to use skateboard grip tape. The pluses are it is cheap, you can get a wide variety of colors if you search, and the good stuff will stick for a long time. The...

I am going to go with skateboard grip tape. I am hoping to find some that is not too coarse and try to color match it to my trailer as close as possible.

I am going to inlay a flame pattern into...

I am in the process of replacing all of the anti-slip pads on my trailer and would like to incorporate the Moomba logos into the design. Does anyone have quality digital images of the logos...

Yes you can run a fat sac in the back especially if you remove the rear seat or move it to the sunpad position (if the older boomerangs offered that option).

Yes, you can also put a tower on it...

You should be able to go to any Boat Top manufacturer and have them make one that will fit your boat.

I have a 99 LS with the Tower and we had a custom top made that mounts to the cage so that...

Occasionally, I get a list to one side although it is not related to the ballast. Check the balance of the load (people) in the boat. If you have more weight on one side of the boat it will list...