Search:

Thanks for all the replies guys. I’ll check all the wiring at the back of the motor like you mentioned. What’s the chances it could be the starting solenoid? If the starter solenoid was bad would the...

Hey everyone so I have ran into this issue in the beginning of the summer where I would turn the key and let it prime and it would make a clicking noise in the engine compartment when I would go to...

Hey guys quick question, I filled the boat up with 91 octane about a month ago hoping I would use it a lot more before they shut the boat ramps down here in Colorado and the local lake shut down...

Much appreciated. So behind where the blank gauge is there is a 4 wire connector underneath the dash. I was also able to locate the sender and the wiring that goes to it. The wire on the tip of the...

Hey guys the boat is a 2005 moomba mobius LSV. I bought the boat not too long ago and have been fixing some issues along the way thanks to your help. There is a blank gauge on the dash with no needle...

Okay thanks for the torque specification I’ll add some permatex to the gaskets and torque to spec and let you know if it fixes the issue.

Hey guys I just replaced my thermostat since I was having overheating issues. I replaced both gaskets and after I put it all back together I ran the boat on the fake a lake and noticed it leaked from...

Yeah I called them they don’t have anymore. They were getting theirs from skiers choice. The manufacturer who makes them for skiers choice quit making them. So anyone who needs the exhaust flange is...

So I got all the personal from skiers choice turns out they don’t make the parts for the moomba anymore or the manufacturer who made them has quit. Instead they sent me parts that I have to “retro...

Very cool good to know. Thanks for the replies guys! When I go to install the thermostat is there a certain way it goes in I got a little hasty and pulled it out quick once housing was off. I know...

Pretty impressive that the impeller can pull water all that way especially if there is air in the lines. That’s the only thing feeding the whole system? Just that one little impeller driven by the...

Hey guys I have been getting into trying to repair things on my boat this time around. I find it fun and interesting learning how everything works especially with the help from you guys. I’m...

Thanks for all the replies I got everything ordered and figured out. Had to order from a dealer through skiers choice. It ended up being 3.5. Still waiting on parts going to get it al back together...

Thanks for the reply. I did check their website they have an exhaust flange in 3” but I measured mine at 3 1/4 “ unfortunately. It’s the same exact looking part though. I found another exhaust...

Hey guys first post here on the forums, to make a long story short I noticed boat was leaking extremely bad it’s a 2005 moomba Mobius LSV, found the problem was the plastic hull through exhaust was...