Search:

That is very true sled but the boat in question will make a good wave on both sides.Well I know mine will and all the skiers choice hulls are similar.

There is no improving the 08 with a five hundred budget.Just the pumps cost more than that.Then add the control boxes and switches with the code lights and you still have to drill two more holes in...

If your boat washes out on the passenger side remove weight from the driver side.

Ballast on the 09 is totally different with a through hull for each bag.It runs three ballast puppies and three control modules/timers that sense when a bag runs dry.Its nothing like the old...

I love wakeskating but it scares the hell out of me.Kinda like anything else,the more you learn the more fun it is.

My lsv does not cavitate but it will suck air under the boat in a sharp turn with the ballast full.It also sucks are past the paddle wheel and freewheels the perfectpass into a false reading at...

Gone the way of the wind.

If its gone through the color into the fiberglass you have to repaint it otherwise it has to be sanded out then buffed.

Oh sorry bud,I have a 09 solid blue lsv with white interior,almost every option from eight tower speakers,upgraded ballast,perfect pass 6.0 with that cool intigraded display,tandem trailer with four...

Don't know yet.I was waiting for the dealers to slow down a bit.

We are buying a 24ssv this winter and I don't think our current new boat is going to bring very much trade in.I would spend a little more and get something like we are selling this winter.

I don't think my lsv handles good enough for that kind of turn.Old dd outback maybe.

Something about the placement of the paddlewheel seems like waves get channeled under the hull and bugg it out at low speeds.Ours is set pretty mild/slow to make changes so it doesn't screw up that...

I live in Oklahoma where the wind comes sweeping down the plain.It sucks.

I have the same perfect pass issues when surfing it slows and surges but never any clunk noise.Try running on rpm mode.

We have about fifty hours on our lsv now and as of yet there are no spider cracks.I look everytime we wipe the boat down.Pulling the damaged snaps and grinding the surface gell larger than the screws...

You think thats bad,I had a tige that would drip water out of the engine raw water intake for three or four days.Several gallons of it all over my shop floor.

I also have the factory four hundred in the floor.

I actually ordered a walkway sack that fills about four to five hundred,then fill my rears somewhere around five or six.Pull the trim tab all the way up and the wake is beautiful.

Got 37 hours on my month old lsv.really enjoying it so far.

Thats the problem with American culture.Everyone thinks bigger is better and strives for the most they can muster.In reality the hulls between the two are very similar and unless you have a fleet of...

Only difference between a 350 and a marine 350 is high nickel content in the block and brass freeze plugs to combat rust.You could use a regular block and change the plugs to brass but it won't last...

The modern lsv has grown by leaps and bounds over the last few years along with the other moomba boats.If you where happy with your oldschool you will be very happy with a newer one.

I traded in our 23v for a lsv because the bigger boat used a lot more gas and diesel in our tow truck.Just felt like a chore turning that big bastard around to pickup a rider.
Best thing to do is...

Ed,My perfect pass is doing the same thing only at surf speed.Wont even reach full speed sometimes.Is there a design flaw of some kind or settings off a little?