Search:

Excellent fit on the top and bottom pieces! Looks great!

Stock rear ballast is what 400#?

Id say put a 750# bag rear starboard locker. Center ballast full. Wake plate all the way up. Try it with the port locker bag partially filled or full if using...

Back of the boat doesn't look like any of the current models really.

Ran up to Ray Roberts yesterday with my girls. Edo88 came out with his Mojo too.

2726027261272622726327264

On my XLV I loop a bungee cord around the front grab handle and hook it onto the flip up seat hinge. I do this on each side in the front, and that secures the two side pieces and the long center...

Went down to the Brazos River for the first time. I cant wait to go back!

272282722927230

If your handy, something like this one on wakegarage.com would be a cheaper alternative and get you on the water quick. You could size it how you want....

My oldest daughter bringing us back to the ramp, one of my twins wanted to 'drive' while idling to the dock, and rolling in to dinner after a long day. Good time on Grapevine yesterday even with the...

My garage is 26" and I had to take the swim platform off and fold the trailer in. Had about 1.5' at the back and a couple inches at the door.

This going in at the house?

Fold the tower down.

How deep are you going? 30'+?

Couple weekends ago went out with wario on his Supra. Ran into the guys from Wake 9.
271632716427165

Past weekend at Lake Grapevine
271602716127162

Thank you!

What kind of sand spike is that?

That was it. No problems with a charged battery. Two full days at the lake and no issues. Thanks!

Ok I will check that this afternoon.

There are two batteries, the second one runs the stereo, and I left everything else on the first one. Using a stinger battery isolator.

I was doing some garage boating in my 2006 XLV...listening to the stereo in the boat and wrapping up some projects. I accidentally bumped the wake plate switch down when I was working around the...

Thank you! Figured Id give it a try. I had a jig saw and I borrowed a handheld cordless router from my brother in law and got after it.

The new sub set up is done. First time doing any kind of finished out box.
2710327104

Start with unplugging the harness at the puck and look at the terminals on both sides for corrosion.

Try hydrogen peroxide and a small amount of baking soda.

Y’all ever heard that free parts cost you the most?! It’s true. Used up a bunch of my time and patience on this free box with subwoofers. It’s starting to come together though. Pieces need to be...

In a car/truck the purge valve is normally closed, unless requested by the ecm to open under certain operating conditions. If it is not hooked up then the valve would be closed and no air would be...

We would put it in the boat and then run across to where we would anchor and hang out during the day. Set the anchor, w floating ball and hook the lilly pad to that, and a sand spike on the beach...

Looks good!
I did the carbon fiber vinyl moomba on my boat as a test too, but only on the back of the boat, still naked down the sides.