Search:

What kind/size boards are you guys using? I'm looking for something for tricks that will handle a 200lb rider.

Thanks

The direct drive models have easy access to the impeller. 3 screws and the cover is off. You can also bump the starter to get it loose. I always carry a spare.

I think the wake surf boards are by design, faster and more maneuverable behind a boat wake. You could do it with a long board, but I think it would get boring pretty quick. If you are going to do...

I think my bilge is going out. Does anybody know the factory or other replacement?
My boat is about 1 1/2 hours away and I want to take the replacement with me. 2003 Outback LS.

Thanks,

I have seen varying sizes from 1 1/2 to 1 7/8 inches on the rad-a-cage thickness. Which one is it? I'm having trouble getting a tower mirror arm to attach.

Thanks,

Thanks for the link Ed. That's about the sickest riding I've ever seen. The wakeskate is unbelievable.

We just got back from our first Wake surfing trip. My boat has no factory ballast, so we stacked two 540 lb sacks on the side we surfed. A full gas tank also helped. Our experienced surfers were...

A word of wisdom on replacing the stock speakers. The size is 6 1/2, but the factory grills leave a large ring if you use a 6 1/2 speaker to replace them. If you go up to the db675, you will cover...

Nice boat, good luck with the cleaning crew. After 13 years of married bliss, I get help about 1 out of 10 cleanings! I really like the Black/white combo. Very Nice! :)

I have an LS, but I haven't tried wakesurfing yet. (NO BOARD)!!! Most Wakeboard setups recommend 60% in back, and 40% up front. I plan on buying a 600lb bag for the back, and a 400lb bag for the...

I went with a 6 3/4 inch speaker. I had to dremmel out the opening, because it's a 6 1/2 inch size. You might be able to get a trim ring from an audio shop. It might cover the extra vinyl area. I...

I'm curious as to the answer of this dilemma myself........

Yep, mine seems to be at idle only. It starts off right away. I also leave the whinners at the dock, so that's not the problem! ;) I will tighten the belt this weekend.

Thanks Smrtz, thats what I suspected. I will tighten it up, and see if that solves the problem.

:p

The last two times out, I am hearing a high pitched whine when in neutral. I'm guessing maybe this is a loose belt? I notice it when tightening up the rope, when dropping the trans in and out of...

How much are you guys saving by doing the install yourself? I'm thinking about adding PP after my wife had me boarding at 30 mph today.

Bummer, the top I have is Burgundy.......unless you are a Redskins fan ;)

What color are you looking for? I might have one in Sunbrella material. :p

Hi Andy, if you remember the name of that stuff, let me know. I have a few stain/discolored spots I can't get clean.


Thanks,

If you have time for one more.........

Thanks,

[email protected] ;)

It's [email protected]

Thanks, I don't want to screw this one up! :p

I have a question for anyone that has a bimini top with the rad-a-cage tower. Where exactly are the mounts located on the tower? I am adding one, and I want to make sure and get the right...

So, Benson, are you saying just put the loop over the tower attachment, without the slipknot? Did it bind when you made the loop, or what?

I have the same boat, and the back hook is fine for most. If you have a skier over 200lbs, that cuts hard, you need them on the pylon. If not, you will be fighting the back end of the boat...

My 03' single axle pattern is 5 on 4 1/2. I think these vary quite a bit.