Search:

It was the distributor. Replaced it and boat fired right up. Timed it to BTDC 10 degrees and running smoothly throughout the RPM range.

Hoping Larry Engine Nut still checks the forums as this has me stumped.
02 OutbackLS. Indmar Assault 310 carbed motor. Unfortunately I’ve been traveling for work more the past few summers and the...

Finally had a chance to actually start disassembling the motor and its finally off the crane and on an engine stand. Removed the trans.exhaust, intake manifolds ,distributor and plugs and wires and...

oil pressure was 60 to 80 as it always is and temp never above 180 it normal operating temp
its a carb engine.

Here is a better pic sorry still small. The river is closed right now so the pain is somewhat lessened but still hurts.

Jesse dont know yet. i pulled the motor and oil pan yesterday and found about 1/4 cup of water mix in the pan. I plan on pulling the transmission and engine standing the motor this week. Then start a...

Its out I hope I can post a few pics. As you can see the last is the painful one
I want to add we checked the entire block,risers,heads no sign of any leakage prior to pulling it out. Also we looked...

jeese unfortunately the sound is port side #2 or#3 cylinder. stethescoped the block,heads and valve cover to best pinpoint wasnt low and wasnt high thats why i am leaning towards broken wrist pin....

defintely hurts. yeah it is just getting broken in at 420 hrs.it has been a one pump turn key and start since i picked it up 8 years ago. unfrotunately no new boat plans not in the budget. one in...

jester thanks unfortunately its in the motor. we checked and rechecked everything.

Engine Nut and All
The good almost 420 hours of great family and friend memories. The bad having to do this.
Last sunday multiple mourning butter ski runs, afternoon swimming and tubing never...

It is different. My windshield on my 02 was changed either late 03 or early 04 and it was definitely different from the original

Ding Ding we have a winner. zabooda you got it. After a very long night thinking about it I was able to start fresh this mourning. I replaced all gaskets and tstat again and the impellar . Checked...

viking thanks the old impellar looked like the new one perfect. I replace them every season. I also pulled the hoses and checked both incoming and outgoing from the impellar
as well as the water...

Summerization went great on the driveway. ran aprox 25 minutes all told. Dropped it it today and temp started to climb past 200. Replaced both impellar and tstat and still going up. checked the new...

A question to all that have installed the SeaDek and have dogs. How has the pad held up
and have you had any issues from the dogs. I have three(2 large & 1 small) and they spend almost as much time...

sled , deerfield thanks for the info I quess its break out another thousand for a camera or close to it. I have seen water and action pics with the DSLRs and there really is no comparison and the...

helix and why should it be different from boating, the Moomba is just a drop in the bucket to all the associated toys for it. thanks for the info

Ian looks like your makeing your Dad ski on a wakeboard rope. Question for you or any photogs on the D70 how do you like it?. My wife wants a DSLR ,she is tired of the crappy pics from 350 dollar...

Jesse the plate reading is correct 0-50 in the 02's seems weird but that is what it is. The plate I believe should be even and not go below as it could create keel steer if I remember correctly which...

thanks for the info guys I will get a few more sets in with them. I went boarding last night and my ski looked depressed. Thanks

After 4 years of faithful service my Venom High wraps gave up on me. I stopped by my local guys and they recommended I give it a try. Almost walked out with a few more toys aswell. First impression...

We just rolled over 382 hours in my 02.

brownski have you checked it with a 12 volt tester to be sure it is getting power at the time it is faltering. the older indmars had a 3 wire oil pressure switch that Larry (engine nut) were trouble...

deerfield
as of about 6:00 pm they ,state and uscg closed the entire chain from cheeseland to alqonquin to all boats. We are thinking the crest now isnt going to happen until later this week . It...