Search:

I found the cheapest place to get it is the dealer but they usually have to order it, I ended up getting it at west marine they have it in stock and in all the different sizes.

My garage isn't deep enough for the lsv, If the wakeplate and the cylinders swung down it would fit, I thought about cutting a hole in the wall for it but my wife wouldn't have appreciated that much....

I've got an 07 LSV with 130 hrs on it and I do have a noticeably long crank time(over 5 secs in my case) sometimes, but so far it has always started(knock on wood). I'm curious about what everyone...

I've never met anyone that has said anything like that to my face or even around me, but if they ever do, my response will be "I chose to spend the other 30k on my other toys", why have one hobby...

On my 07 I drilled a hole from inside the storage compartment on the port side, up through the center of the front base of the tower at an angle similar to the towers. I basically copied what the...

Those are the correct parts.

the part # on the valves are 57203 if you look at the orbit website it will give you all the necessary info on the valve

Thanks guys, I wanted to add that the complete install cost me less than 350.00 and I have a friend thats a fly-high dealer so if anyone's interested he said he would sell the bow sack for alot...

I took the cupholders out to cut the nipple off of the bottom and they didn't stick well again, I'm going to put a brace in between the cupholders to hold the bag further to the front so the...

few more pics of the empty pumps


Parts list

1-1 inch orbit sprinkler valve- home depot
1-1 inch 2 outlet sprinkler valve manifold- home depot
1-fly high integrated bow sack-friends a...

I've got an 07 LSV and the wake cleans up nicely when you add weight up front in addidtion to the gravity 3 system. I started by adding a 4th sprinkler valve, I used a 1 inch vavle instead of a 3/4...

theres enough space to fit the front end of the rear ballast bag when it's full, however tall that is.

If your going to change it you'll want to take it out of the rest of the circuit completely. if you just splice it in you will still have the rest of the wire getting interference to deal with. But...

Be careful with the glasses, the faceplant falls are inevitable, the water in your eyes hurts a little while, but I would be scared of the damage glasses could do. keep the boat slow until you get...

Here are 3 starter pics, everything is fitting well, I was concerned with the cupholders rubbing the bag so I inflated the bag with air. They will be fine as long as I cut the drain tube off the...

I'm halfway there, I got the valve, manifold and fittings at home depot and I've got the bag in the boat. I have to get the bilge hose, 1 more bilge pump and 2 thru hull dump ports and I'll be set....

When I upgraded the stereo in my boat it had the whine also. I found the ground wire for the headunit ran all the way around the bow and into the distribution center under the drivers compartment. I...

I definately get the air also, and easy fix for it is if you tow a long distance to put a piece of masking tape over the empty port on the side of the boat. I'm going to put a check valve in the...

In the LSV's the center sack only fills about halfway due to lack of space, so I'm going to add the integrated bow sack and a 4 port manifold with an extra valve, I've been filling a 600 lbs sack...

I'm adding bow sack to my boat and I'm trying to keep it as simple as possible so I need to know who manufacturers the electric ballast valves for skiers choice. I've tried atlanta marine today but...

mine reads 38-39 mph at wot, not sure what rpm, I dont ski so I've only went there a few times. I have an 07 lsv with an acme 14x14.25 four blade prop. the stock prop would go 42 with 2 ppl and no...

Install pics? how did you plumb it in or do you manually fill it?

I got 4.5 gallons per hour a cpl of weeks ago with 1200 lbs of ballast and 10 ppl in the boat. I still have to fill it up from this past weekend and then I'll post that also. I have an 07 LSV, this...

It was a drawer, I dont remeber what it cost it wasn't much though. It isn't water proof but it doesn't get dripped on where its at and if water reaches it from the bottom your cellphone will be the...

I got the glove box out of a supra for my 07 lsv, and I had to make the opening bigger so it would fit. I also had to shorten the front 2 studs for the seat frame so the glove box would slide in. I...