Search:

That would be great, thank you!!


Sent from my iPhone using Tapatalk Pro

2016 Supra SA - this is the storage compartment on the port side just in front of where the rear bag is. We got hit with rain pretty bad while on the water and this compartment filled up with a...

Update: Pulled the leaking docking light off shortly after the last post, I was surprised to see it is designed for water to come in around the LED’s and then drain out of the bottom of the aluminum...

Makes sense, that would make it easier so I don’t need someone outside to catch the light.


Sent from my iPhone using Tapatalk Pro

I will give that a shot, I did not try the hammer. Thank you very much for the input!!


Sent from my iPhone using Tapatalk Pro

Is there something other than the studs/nuts that hold the light in? I was thinking the light would pop off after removing all the nuts but it would not budge.


Sent from my iPhone using...

2016 SA400 - did some surfing this weekend and noticed wet carpet in the bow after we got done. Appears to be coming from the starboard docking light. I was going to reseal it so I removed the nuts...

Gave that a shot this weekend with no luck. Even tried disconnecting the lines from the bags and filling them with water to try and prime them and that didn't work either. It would push a little...

Thank you for info! When I initially talked to SC about the the surf system bugging out, they said it sounded like a ground issue or something maybe shorting out. Had me confirm the satellite antenna...

Looking at the manual it shows the water intake between where the driveshaft comes out and the paddle wheel, doesn't really give much info on it. This is only my 3rd summer with this boat/a wake boat...

That's what I am unsure of, the boat sits on a lift all summer under a canopy. I am heading out this weekend with the trailer to pull it and check it. I'm assuming I should be able to get to it...

Little update, spoke to SC and they had me check/clean some connections. Now I seem to have all of the pumps working, however they are not pumping water. I hear them turn on, shows on the screen...

This is the Manual Override Enabled message that popped up on the screen.

https://uploads.tapatalk-cdn.com/20210719/a7014a65800ad4f21cb5c83de904bf22.jpg


Sent from my iPhone using Tapatalk Pro

2016 SA 400 - So this weekend we were surfing on my profile (bags almost 100% full) with everything working as it should. I then switched to one of the girls profiles (bags around 50%) and this is...

Looks like you’re right, when I glanced at the orange one I saw 1/2” and thought it was referring to the square head.. thanks!


Sent from my iPhone using Tapatalk Pro

Do you by any chance know which wrench is needed for a '16 Supra? Mine is currently at the dealer getting serviced so I can't check the size..

If I was ordering a new one it would be hard for me to NOT get them. Would make life so much easier docking and trailering. The salesman said he hasn’t had an opportunity to try them yet.


Sent...

I did not. I’ll take another look when I go back to get my boat.


Sent from my iPhone using Tapatalk Pro

If I had to guess I’d say 3/8” aluminum. Looked very well built.

I did expect to maybe see some type of screen to keep debris/fingers out but it didn’t have anything of that sort on it.

Sent...

https://uploads.tapatalk-cdn.com/20200921/efc9d5c124ddad23194b93eb058e1235.jpghttps://uploads.tapatalk-cdn.com/20200921/a2574a34754b0fc55906c8ddaa8dfc7b.jpghttps://uploads.tapatalk-cdn.com/20200921/dd...

Gotcha, I need to flip through the owners manual and familiarize myself with what all needs done.

Agreed! I made a habit out of always peeling them off, now I will take them directly to the trash. Lesson learned.

Do you guys do everything yourself regarding winterization - full service (oil change, fuel filter change, etc.) and winterize? I need to look into this and learn how to do it myself, closest Supra...

That's pretty wild, would definitely make me scratch my head trying to figure that one out. I was thinking the same about still having enough flow but was looking for some reassurance. The thing was...

Totally agree. I typically never let it get below 1/4 tank so I'll just have to keep up with that and keep an eye on it, so annoyed with myself doing that. Thanks for the input!