Search:

I should add that I have have Zero Off Cruise (gps?). When engaged it runs off gps not the paddle wheel. If I’m correct Holdmybeer is the CAN you are referring to NEMA 0183?

My 2015 Moomba Mondo requires a new Triducer (depth speed and temperature). The depth portion quit work, I called up my dealer and they want almost $1000. Really? For a part that was a few hundred a...

Finally installed. Slipped in perfect. What a difference in bass. My neighbour even commented it was too much for him.
30847=CONFIG]30847[/ATTACH]

30785

Just have to slide it in.

I’m really glad I took the advice of others to make it out of cardboard first. And I’m glad I did. The prototype slid in and out with ease. Several tweeks but in the end it worked. The helm seat was...

Ok was fortunate and got measurements from a dealer.
Here are photos of the tuning sealed box before it’s sprayed. Been slot of work. Pre making a cardboard box for fitment is the key.30781

Hi folks I’m building a sub enclosure and need a measurement. The boat is in storage at the cottage and I won’t be up there for awhile. I have a 2015 Mondo and require a measurement of a somewhat...

Thanks MLA for your help. Your assistance is greatly appreciated. A sealed custom enclosure it is. Last night I made a cardboard template for the sub box and will transfer the measurements to the...

I really appreciate all the help and additional comments on other applications. It certainly helps with expanding the knowledge base.
I drove up to the cottage this weekend to look at the current...

Thanks MLA so much for the reply. The woofer is a KMW 107LC that is affixed directly to the panel at the helm as seen in the photo you posted above. Behind it there’s no top enclosure or panel there....

Thanks for the response.
I just got off the phone with Kicker and the tech guy is saying go with a custom built sealed enclosure with the model of sub I’m using. He’s saying the ported vented...

I’ve spent the past few days reading this forum and the internet on sub enclosures and have a few requests/advice.
I currently have a 10” Kicker KMW sub (free air) mounted under the helm to the...

My neighbour had his cottage broken into last week. They found keys to the garage and stole two snowmobiles. And they are nowhere to be found. I got thinking, I could have been targeted as well and...

996scott the code you sent is not valid.

Could I please be provided with the Wakemakers discount code?

Thanks

Mxmark4, yes those are my Roswell cans. I spoke with Roswell and they recommended a Fusion speaker. Off hand I cannot remember the model number.

Hi folks, I haven’t posted in sometime. I need some audio advice from the experts. One of the speakers in our Roswell cans needs replacing. It’s a 6.5” enclosure with Polk Audio MM652 6.5” speakers....

So I messed up coming into my boat lift by not having the cradle low enough. Im in search of a big letter ‘A’ in black chrome that goes on the side of my Mondo. I do have a new ‘B’ an ‘M’ or an ‘O’...

There are two breakers in this boat. They may have tripped. One is located next to the battery bank and the other one in the engine compartment behind and below the ski pylon. Press the reset button...

With fall around the corner (ugh) I’m thinking of installing a heated driver seat kit in my Moomba Mondo. Has anyone done this? Your thoughts/advice?

Thanks

28628


I searched the internet and could not find what I was looking for so I came up with this. I ended up using 1/4” frosted polycarbonate that was cut with a CNC machine and secured with 3”...

Hi everyone. I'm thinking of installing a colored acrylic/plastic/poly-carbonate cover over the amp rack board in my Moomba Mondo. I have three amps, an equalizer, a power distribution block and a...

Good morning, I’m in need of a few things as well. Could you please email the discount code?

Thanks

Hi everyone, I just changed my oils and before I filled it up again with oil I turned on the ignition but did not start the engine. The computer registered a fault code; low engine oil. Once I...

No we aren’t skiing off kilter. Not sure why the photo is sideways.