Search:

Type: Posts; User: Turbinesurgeon

Search: Search took 0.01 seconds.

  1. If water got above the vent for the V-Drive then...

    If water got above the vent for the V-Drive then more than likely there would be water in there.
  2. Replies
    3
    Views
    316

    I can’t either. I hope admin sees this to get it...

    I can’t either. I hope admin sees this to get it resolved
  3. Replies
    1
    Views
    55

    Have you ever tried adjusting the contrast to see...

    Have you ever tried adjusting the contrast to see if that helped the screen?
  4. Replies
    3
    Views
    283

    I junked the manifold set up. I have individual...

    I junked the manifold set up. I have individual pumps for each bag. The two new fill pumps for the rear bags have mushroom inlets so no need for a sprinkler valve. The center bag is still on the...
  5. Replies
    17
    Views
    737

    Check the kill switch with your multi-meter. It’s...

    Check the kill switch with your multi-meter. It’s directly inline with the fuel pump
  6. Yep, that’s from the dripless seal. Glad...

    Yep, that’s from the dripless seal. Glad everything is working. I take it your V-Drive has the proper amount of oil? The light is not for engine oil pressure but for the V-Drive oil pressure and the...
  7. Replies
    2
    Views
    210

    It actually worked. The drain and fill on the...

    It actually worked. The drain and fill on the back side are the same height. I filled the front bag and it only fills half way because there is no vent. Opened the drain up front and I was able to...
  8. Replies
    2
    Views
    210

    Gravity III Forward Ballast Sac

    I have the 1180 bag in my 2006 front locker which isnít vented from the factory. The bag has a fill and drain port at the rear and one drain up front. My question is can I flip the bag over and use...
  9. Replies
    3
    Views
    283

    Gravity III upgrade

    I wanted to share my experience upgrading my 2006 Sunsport Gravity Games III ballast. I recently purchased this boat as a project and I really have no experience with the way the factory system...
  10. Replies
    17
    Views
    737

    Did you troubleshoot the tether cord kill switch?...

    Did you troubleshoot the tether cord kill switch? On my 06 that switch cuts the fuel pump
  11. Replies
    5
    Views
    457

    Oofta that seems more than 1100 lbs

    Oofta that seems more than 1100 lbs
  12. Replies
    5
    Views
    457

    What are the dimensions?

    What are the dimensions?
  13. Replies
    5
    Views
    255

    I just had my interior done and most shops in the...

    I just had my interior done and most shops in the Phoenix area would charge about that price. Only one shop I visited was dirt cheap but I didn’t get a warm fuzzy feeling they were using good...
  14. I wanted to keep this thread alive since there is...

    I wanted to keep this thread alive since there is so much good information here. I just recently bought a Supra Sunsport 24v with the playpen option. I stood in the front ballast compartment and I...
  15. Replies
    0
    Views
    139

    Tower light bulb replacement

    Anybody know where to get replacement bulbs for tower lights? There is no part number on the bulb. It just says Zire on it. They seem to be sealed halogen.

    28271
  16. Steering cable is around $60. Fairly simple to...

    Steering cable is around $60. Fairly simple to replace and about an hour to replace. Good advice above for the hard starting issue. Check all the basics first.
  17. Replies
    22
    Views
    2,056

    I would do that if I didn’t have to remove the...

    I would do that if I didn’t have to remove the platform to get it in the garage. My co-worker mention just welding a big bead down the backside to take up the slack. I’m thinking a guy could make...
  18. Replies
    0
    Views
    142

    Walter V-Drive light

    I have a Walter v-drive and the warning light isnít coming on at all. The light itself is good but there is no power going to the switch on the v-drive. Iíve been under my dash trying to find the...
  19. Replies
    22
    Views
    2,056

    I had a friend weld mine up and he did a good job...

    I had a friend weld mine up and he did a good job but told me the pot aluminum was junk. I think a long term solution would be to make new brackets out of stainless.
  20. Replies
    22
    Views
    2,056

    I decided to install a heli-coil and 10/32 screw...

    I decided to install a heli-coil and 10/32 screw on the backside to take up the slack. Hope this works.

    2804128042
  21. Replies
    22
    Views
    2,056

    Thanks for the pic. I think I’m going to make...

    Thanks for the pic. I think I’m going to make mine like that too. Seems easy enough to do.
  22. Replies
    22
    Views
    2,056

    My swim platform bracket receivers look a little...

    My swim platform bracket receivers look a little different and I see no room to add a set screw. I think I’lll try drilling and taping the back of the swim platform bracket and installing a button...
  23. Replies
    22
    Views
    2,056

    Do you have pictures of where you put the set...

    Do you have pictures of where you put the set screws?
  24. Replies
    22
    Views
    2,056

    Thanks for the replies. I figured I would...

    Thanks for the replies. I figured I would probably end up having new ones fabricated if these ones wear out. I wonder if I should get some fabricated to have them built taller to raise the swim deck.
  25. Replies
    22
    Views
    2,056

    Swim platform question

    Got a question about the swim deck brackets. I bought my first inboard recently and itís 2006 Supra Sunsport 24V. I went to the Supra forum but there doesnít seem to be much activity there. I...
Results 1 to 25 of 25