![Moomba on Facebook Moomba on Facebook](/assets/images/chicklet_facebook.gif)
![Moomba on Twitter Moomba on Twitter](/assets/images/chicklet_twitters.gif)
![Moomba on Vimeo Moomba on Vimeo](/assets/images/chicklet_vimeo.gif)
![Moomba on Instagram Moomba on Instagram](/assets/images/chicklet_instagram.gif)
![Moomba on Blogger Moomba on Blogger](/assets/images/chicklet_blogger.gif)
Type: Posts; User: Birdman
navionics hands down best app for out on the water and i have never paid a yearly subscription just buy the app download your area and done
So in your understanding of a cooling system is that the thermostat opens flushes the block and closes? And as for the sucking through the thermostat I’m not sure where you got that from never said...
And when the thermostat is closed that’s when it’s bypassing the block the thermostat open is pulling cold water from the lake through the block to cool
Sent from my iPhone using Tapatalk
I’ve done this for 4 years in northern Saskatchewan never had a problem I usually run the boat dry for about 10 seconds to get as much of the water out before putting 12 jugs of anti freeze through
...
I got 250+ hours never a problem you can take them out and see how they look
Sent from my iPhone using Tapatalk
Double this for the price I could have gotten a few from the local hardware store that worked as well
Sent from my iPhone using Tapatalk
The sheer pin between the handle and the gear broke on my jack the website says life time warranty would this be something that is covered
Sent from my iPhone using Tapatalk
I had a crack a few years back in one of my prop fins (don’t know why) that did similar thing till it flew off or your shaft could be bent from an small strike guys will tell you to check your...
So I was giving the boat a buffing today and noticed some cracks in the gel coat coming from the front trailer tie down the dealer told me that cracks are not covered under the hull warranty this...
I put composite door shims in mine helps a lot once you tighten up the set screws it stays tight
Sent from my iPhone using Tapatalk
this is solid idea for me don't have to worry about anything then! thanks
whats every one mounting these with would a L bracket work screwed to the box and the floor. if so how thick is the floor so i don't poke the screw through.
haha so if im understanding right the only real part that can move is that pice that attaches to the top of the rudder is that a set screw of some sort there also?
ok i just went back and read the posts any idea what may be wrong with mine that its flopping around in there and my steering wheel has to be turned to keep the rudder straight?
should that just flop around in the hull?
is the cable incased in something?
the bar that attaches to that mla
its still attached just loose
its the arm that comes down beside the engine and hooks to the rudder it is flopping around in there
soo... the bar that goes back to the rudder behind the engine is loose any one know if there is a way to adjust?
depth finder?
ok thanks guys
k thanks and yeah i have to get some l brackets like under the seats to screw it to the floor
yeah i think it jumped a tooth can a guy just crack that open and move it back?
did a little research does anyone see a problem with using 3m super 77 spray adhesive?