Search:

Shouldn't be any special tools but it is a wierd place to try to have both your hands working amd keep your balance.
If you have line wrenches they work a lot better than standard open sided wrench.

The kill switch video makes this look 100% like a ground issue.

Check the triducer cable and see if you have a rub mark somewhere. HAK is correct you can see it in the v-drive locker and the...

You can buy a Clymers manual for indmar engines

https://a.co/d/bk4Juec

It has wiring diagrams in it to track down what might be causing the issue.
The ECM takes in sensor inputs and then...

I thought the SL was 2022 or 2023. Haven't seen the SE get love at all.
My guess would be the SE. The new XStsr need competition and Malibu has the 25 and 26LSV.

I don't think the SE grows but...

So...kill switch goes to ground when pushed and kills your ignition. You are saying everything comes back when you pushed it.

Loose ground cables. Or the whole bus bar under the dash could be...

Good to hear you keep the extra pump.

The modulator makes sense. It's about the only thing left to change before swapping the whole distributor. Glad to hear you are still on the water.

Yep. I can build a SBC without even thinking. Like most that is just something you never forget.

And I think most people know Jenny's number.....lmao

Following along for few years now....

Supra SR gone to SV
Supra SL design 2023
Moomba added Tykon now Max got upgrades to match
Moomba Mondo gone for Kaiyan

My guess the Mojo or Craz gets...

Good video Hak. In VR it would make me dizzy.

The boat looks great in that calm water. You planning on throwing tint on the windshield? I think it would add to the black hull, but just a personal...

The easiest way to check for spark is a timing light. Just put the clamp around each wire and crank the engine.

If you change the distributor the only hard part is making sure the engine is at...

It has been mentioned before on this site.
The ballast relays that moomba use are not large enough and if you care about your timers working there is not a direct fix.

I think you could use your...

The 2 bolt gasket is a standard 5.7L GM 1996-1999 truck thermostat gasket.

The 3 bolt is Indmar specific to the custom thermostat housing. You could get gasket maker material from the parts store...

I would start behind the display. Not sure what they are using for connectors. If they are rj45 type ethernet connectors, the plastic gets weak. I would hope they are twist lock sealed being...

Try this.
...

Still on the water?

Did it no start again?

Coil is new
Plugs are new or at least good
Wires are good
Connections all tight
Fuses/breakers good nothing tripped

Battery ran for 2 weeks assumed good

Can you check the connection from...

Did you determine the no spark to be coil to distributor, or distributor to plugs?

Just curious where the problem is starting.

Rotella meets CJ4 CI4 AND CI4+ but not SL/SJ because it is diesel oil.

C = Compression engine (diesel)
S = Spark engine (gas)

But yes it would work and has zinc in it for flat tappet lifters.

Try this 1
...

That is stern drive gear oil.
Please don't put that in your engine.

Indmar engine manual for 2003 is Pennsoil 15w40. It is hard to find.

Where are you located? I'll try to help you source...

Dom,
When you say 30-40* you are talking C, correct so 100-105*F

25w40 is rare for the US but not sure about availability in other parts.
10w40 wouldn't scare me or hurt anything. What engine...

You could have air in the system.

Is your heater leaking or allowing air in the system?

I cannot answer specific on the indmar 6.2 but I have worked on a 6.2 raptor f150.

The housing look the same and it should be an o-ring seal. The new thermostat should come with the o-ring. 160*...

Go to the local auto store and get a 165* or 150* thermostat for a 2012 Ford raptor 6.2.

Same exact thing.

Or....

https://bakesonline.com/products/indmar-ford-raptor-62l-thermostat?gQT=2

South Eastern Foundries - Bruce Angel.

He sent me 4 seals and I only need 2 (I think). My rudder kit is Moomba # 115203, so make sure that is the same for 2022.

I will look and see if I have...