Search:

Well the banks will be clean at the start of next spring/summer season.
Assuming TVA removes all of this.

How do you like the E-pex tower?
The video of it folding down looks clunky.
Almost trapped under it while folding.

That explains a lot.
I gave up social media years ago and had no idea.

Good to know the knowledge is staying protected on the forum.

Ohio was not busy this year either.
Several people new to the wake boat scene in my local lakes but they weren't regulars through the summer.
I didn't make it out as much either but it was just the...

Tommy,
You ever get your overheating issue resolved?

You ever figure it out?

Might need a software update.
This was mentioned from other Moomba owners around 2020-2022.

Dealer can do the flash since you are still in warranty or you can try it yourself.

How is water depth at the other 3 in late June - July? I know Norris is 80-300ft deep. Safe to assume the other 3 are similar?

We boat in 10-30ft in Ohio, so really not an issue but curious. ...

Just throwing this out here hoping a few locals can give some input and anyone else that might have knowledge.

My family books a house on Norris almost every year. This year we couldn't make it...

When you say "locks up" is the motor vapor locking of so flooded it physically has too much gas in the cylinder bore?

Vapor lock I understand. The other would be too much fuel and very bad...

What year?
Skiers stops making replacements after 5-7yrs so based on age you might have to find a local shop.

I have a 2015 Mojo. It is tight but being 23ft long everything is a little stretched out.

I had about 8" from driplees seal to coupler. The coupler is 2-3" from the fuel tank. Just have to stay...

If you need help, reach out. Never broke a shaft but did have to remove everything you are to replace my dripless. Tim @ Glide helped me get everything I needed. Did you also get new strut...

Fantastic.
I'm sure the dropstep, thrusters, e-pex tower, etc. all add extra weight also.

10k+ weight all full then add gear, fuel and people

The added weight is impressive on the Max.
I was hoping to see this on the Mojo and Makai also. However, seeing the dropstep come to the Moomba line after 1yr is a nice touch.

I can fix this for you.

I had the same issue and had to MacGyver it on the water.

From the top of the coolant reservior there is a small 1/4" hose.
Remove it at the reservoir and insert a...

If the v-drive is over filled, when it gets hot or under heavy load, the fluid can burp out of the vent on top. It's painted black and it a metal cover over the vent tube.

I see you did the right thing.
Just drink a beer, laugh, and tackle 1 problem at a time.
Not worth ruining good memories over a bad attitude.

And you're right, could be worse place to spend a...

V-Drive reservoir?

You mean the case is cracked? The v-drive and fluids are all self contained.
Do you have pictures so we can try to help?

My 2015 is keyed at the coupler.
Not sure how you could mess it up and not get it to align back to design.

This is your choice, but I'm marking the shaft and coupler with a sharpie and separating.

No way I would pull the tank for this. The new dripless comes with an install guide for pushing the...

I went with Glide dripless

You shouldn't have to pull the vdrive on the tank.

Unbolt the coupler and save for re-install.

Loosen and disconnect your packing seal - I would replace the whole unit with a dripless.
...

Rather have thruster for that coin!

Banks has the best solution but it's expensive. Replaces the whole intake elbow.

Berg once you do this the only issues would be VGT accuator and transmission. Since you aren't making crazy power...