Search:

My boat is a 2019 and has the same fittings as yours, did you manage to change it up?

I just checked with the dealer, shipping will be more then the cost of the tray...

Mine just got fixed, 2 years old no warrenty, $200 bucks to pull out, stitch it and put back in.

Anything that is directly wired to the battery such as your bilge, pretty sure that would be the only thing wired direct.

It would be the same as shutting off your batteries, there isolated. It must be a calibration in the software and not something that is power reliant.

So by end of summer i finally figured out my boat was probably around 13 deg of pitch, with all water ballast and 1400lb of lead. LOL
Pulled all led out recalibrated the inclinometer and put it all...

Bags have been sold

Pretty sure the cost doubles if you order them after the fact on by a new boat, just need to find someone that is willing to order an extra set when building a new boat.

When ordering a new boat what is the approximate cost of the board rack upgrade or extra racks?

30483
Picture of the setting page

Disable autofill on the development page, basically adjust the trigger point so it doesn't refill my ballasts.
I will be back in Invermere hopefully Friday and be able to adjust it again and try I...

It was on the development page, I started to adjust the trigger point and I was up as high as 250 and counting. I didn't have a chance to try it since adjusting.
When autowake was engaged it...

If I want disable autofill what should my trigger and trigger margin be set at

2019 mojo with new software

Should trigger be set really high(myguess)?

Sent from my SM-G998W using Tapatalk

Sent from my SM-G998W using Tapatalk

If I want disable autofill what should my trigger and trigger margin be set at
2019 mojo with new software

Sent from my SM-G998W using Tapatalk

I was utterly impressed with this when i saw it.

Could you not calibrate you boat with weight in you boat as long as it's sitting flat on the water?

Sent from my SM-G998W using Tapatalk

Just wondering what everyone's experience is with the software update from last fall.
I recently updated the software and just waiting for the boat to go in the water.

Bump to the top- Still for sale - 900lbs bags

which riser did you install ?

Currently in my boat are the wake makers exact fit bags along with 1250lbs added lead- total ~ 5k of ballast and lead.

we might be married to the same person. Lol

66 inches long
22 inches high
24 inches wide

They are shaped like an enzo baghttps://uploads.tapatalk-cdn.com/20210614/30c09697fb61b484106dde5d2de49875.jpg

Sent from my SM-G998W using Tapatalk

You are correct sorry guys, there are 900's

Im guess less than a $100.00