Search:

Honestly, I did not want to change out the entire hose system. Plus I could not, for the life of me, get the darn 3/4" connectors off the bags. So instead of buy new bags, hoses, connectors, so on...

I used a 3M Whit silicone/adhesive that I purchased at West Marine. I think they have it at Home Depot. After using the stuff, i think I takes about 24 hours for it to dry 100%. I drilled from the...

You Da Man--

Did you ever get your ballast system taken care of. Please let me know how it turned out.

Tazz

Do not be scared. Just make sure when you do drill, measure and remeasure again. When I was sure were I wanted to drill, I drilled a very small pilot hole just to make sure that is were I want the...

Glad I could help you out. If they have a problem or do not understand, drop me a line. I will be more than happy to walk them through it. Or just show them this link.

The tools I used goes as follow
1" carbide hole saw Home Depot.
18V Dewalt cordless drill
lots of beer ( when job was done of course)
The carbide hole saw kept the gel coat from craking. It was...

Vented Loop
https://forum.moomba.com/picture.php?albumid=23&pictureid=1417
Vented loop installed This needs to be as close to the bag and as high as it can go....

You will three of this set-up
https://forum.moomba.com/picture.php?albumid=23&pictureid=795
Here is the first one
https://forum.moomba.com/picture.php?albumid=23&pictureid=801
Here is a picture...

First question--
Stock Ballast system goes as follow:
1-3/4" Scupper
Shut off valve
1 500gph pump
water strainer
3 sprinkler valves
bags

Modified system

Good three pumps is what you want. Now I would find out if they will be putting three intakes for the pumps. Will they be using vented loops? These loops take the place of the sprinkler valves. ...

I love the mod I did on my boat. Three 1200gph Tsunami Pumps. One for each bag. That has been the great mod I have done so far. If the dealership is going to do it, I would opt for the Tsunami...