Search:

Thank you all for the help. I think it's going to the shop. I want the hull checked out and want to make sure everything is alright. Just hope it doesn't take them forever...

I don't see any...

My boat is an 03, I saw somewhere where the strut is suppose to be bent to the left. Wonder how hard it is for a repair shop to find out if it is bent.

Just spent a few minutes under the boat again... The rear support for the shaft and prop appears to be completely bent. I need to find some pictures on here, of that area. I saw some a little bit...

Thanks LSM. If I run the boat out of water, will it still produce a vibration without being under load?

I think this is going to get expensive quick...ugh.... Maybe an insurance claim.

I appreciate the quick replies. I got the rutter out, it is definitely bent, anyone know where I can get one? Haven't tried looking yet. The prop looks perfectly fine, no nicks or anything. I had...

Follow Up. Found the 4 bolts to release the steering rudder from underneath boat. I am now having a problem removing the steering shaft, or cable. Since I am doing all this by feel, under the gas...

I hit a stump in my Mobius LS today. There is a bad vibration above 1000 RPM, I thought for sure I hit the prop. I got the boat on the trailer and the prop doesnt' appear damaged at all, I believe...

I had this problem on my 03 Mobius. I actually changed my hose setup, I ran the filler hose to the top of the ballast and the empty hose out one of the overflow holes. This has worked a lot better...

Excellent, That is what I will do! I greatly appreciate the help!

Jason, While I have this all apart, is there a better way for me to drain the tank? I was thinking about running the filler pump to the top of the tank and run the drain pump out the side of boat. ...

The top of the tank has two hoses, that go to each side of the boat. They are just there for overflow I guess.

So it is suppose to drain back through the hull from where it fills. This just didn't seem right to me. I will hook it all back up and try out the solenoid as you suggested.
Thank you for your...

Although it has been a few weeks, I am pretty sure I tried that.

Do you know how your pumps are hooked up? I don't believe mine are right.

Who is Z? Sorry, new here.

I can get pictures if needed, please check out my other thread.

https://forum.moomba.com/showthread.php?t=7853

I got the ballast drained, but the setup doesn't make any sense to me. I wonder...

I have an 03 Moomba Mobius with a single ballast "tank" under the rear seat. This is a white plastic tank that the seat itself sits on. The ballast fills fine, but I had to manually drain it.
...

Any ideas on how to drain this ballast?;)

Sorry for delay, haven't been able to get to working on the boat yet. I think I have told you all the wrong model. I have a plastic molded tank in the rear that the seat sits on top of. I don't...

I recently bought an 03 Mobias LSV, took it out for its maiden voyage the other day, checking everything out, I could not get the ballast to drain. It obviously filled alright, when filling it up,...