Search:

Yes, basically. I had to order a template kit from them. It's a roll of mylar and comes with specific instructions. You cut out the mylar a little larger than the piece you are creating the template...

Here is the finished product guys. I'm really happy with the way this turned out. I ended up liking the larger step area more than a skinnier one such as the stock step. Sometimes there are a couple...

Couple more photos.

Hole for engine cover latch.
https://i.imgur.com/4rUf4r4.jpg

Waiting for gatorstep
https://i.imgur.com/7TOckYp.jpg

I finally made some more progress. Just about done now and just waiting for the Gatorstep to come in.

The steps (basically) starting after the pieces were removed from the boat.

1. Remove...

Here is the engine cover with all the foam and vinyl removed. The material is a honeycomb aluminum panel made by Plascore. There's a notch on each side of the panel in the middle I need to figure out...

I'm going to be putting Gator Step down on the engine cover as suggested in the OP. I just pulled off the vinyl and started on the foam last night. I contacted the local dealer about getting the...

Here is what Skylon sent me.
(2) knobs (same as original)
(2) springs (I think they sent me springs that were too long. They wouldn't compress enough. I used the original springs and they were...

I talked to Skylon. The knob is threaded onto the pin with lock-tight so it needs to be heated in order to break the bond and remove it.

Update on this issue for future use and reference:

SC referred me to Skylon about this issue today. I talked to Robby there (extremely helpful) he told me to remove the knob, it is threaded onto...

Old thread revival.

How the hell did that plunger fall out? I'm trying to get mine out right now and I can't figure out how to get it apart. Do you know how it comes apart?

I'm trying to fix...

This drain plug in the muffler always gets more water out of it after I disconnected the hose fittings prior.

Mine never really gets tight either. I just tighten it about a 1/3rd of a turn after...

I know Indmar recommends changing at 35 hrs for surfing and wakeboarding or high loads but that is unnecessary with advanced oils, IMO. Maybe that is true for conventional oils. Most of what I use...

I usually use Mobil 1 in my vehicle engines but I haven't found it available in synthetic 15w/40 so I use Rotella in the boat. I'm excited to see the UOA of the T6 compared to the T5. I'll post that...

An FYI for anyone curious about oil change intervals. I usually take some oil samples periodically so I know my oil change intervals are acceptable. Below is a used oil analysis from my 2013 LSV with...

2013 Mobius LSV:

I also had loose steering. I couldn't find the Allen keys so I decided to take the wheel assembly apart. I realized after it was apart that you can only see the Allen keys only if...