Search:

The absolute best thing to do is to get your software updated and then you will have the “Go Home Leveling” option and it will work just like you are wanting.


Sent from my iPhone using Tapatalk

For those that don't have the "Go Home Leveling" as a preset, I believe you can just set your autowake amplitude to 0 which I believe is also a preset option and it will use ballast to do the same...

So the setting for this is "Go Home Leveling" depending on which software version you are on you might not have it. I know when I had the original software on my boat all I had was "Go Home". I...

What boat are you running? Do you know what software version you are running?

As far as the 7” screen I can’t speak to if I would go with it over the 4” as I have never run the 4”. I can say I really like the 7” screen and if you want to run any maps you have to have it.
...

Did you have the 2 rear pumps running when you took this pic? Obviously if you did it would be right at the beginning of a fill or end of draining as you #s are 0 but that could be it.

Side not...

Of course I would make a comment on this thread and then have someone break the knob off my radio the next weekend LMAO

How did you replace your knob?


Sent from my iPhone using Tapatalk

So confirmed that there is no “River mode” anywhere in the settings or in the development pages. Seems like the only option is to adjust your set speed when turning and heading the opposite...

I also took this one of it deflated at the bulkhead where it goes through showing that mine doesn’t go “end to end” https://uploads.tapatalk-cdn.com/20220626/4c3b7d152b4c70c476a4ef8e196f3ee1.jpg
...

So I did some looking at mine and I feel like you have the right bags or mine are wrong as well. Here are some pics of them filled. ...

Were you able to get the dimensions? Any word from WM?

Ya the new prices are a real bummer. Does anyone think that these MSRPs will hold long term?

Why would you need the GPS operational in order for the paddlewheel to work?

So here is a post Matt Brown made a while back that would lead me to believe that if you have a paddle wheel present it is wired up as a back up to the GPS

"hey guys! Its me again, Matt Brown. I...

I have had the same concern as you two. I have been brainstorming a solution for venting the midships like I have done my rears but it will involve putting a hole in the removable floor. The bow I...

Here is a pic of bothhttps://uploads.tapatalk-cdn.com/20220622/50933eaa9998e6068cfa3de0334729f5.jpg



Sent from my iPhone using Tapatalk

I have the Wet Sound Speaker Suits for my REV10s and as 996scott said they fit perfect and work great!! For my Trition Board Racks I have the SpeakerSox on those and they fit really well. I even...

It makes sense and there are tons of us using ZeroOff GPS but I feel like most people are boating on lakes so current speeds are not a concern. There are a few guys on here that do surf on rivers...

Ya you can even build your own kit for a little cheaper on the wakemakers site. As far as why SC went to these fittings, if I had to guess it is to be able to have "subfloor" ballast. If they had...

I won’t be at mine until Friday sorry man. Kind of strange they are asking for that. I would think that from the serial # they would be able to tell you if you had the right bags or not.

...

The factory bags do have the ports to put a top vent on. I wasn’t aware they would kits for this I just bought all the parts and did it my self. I ended up using crimp style hose clamps instead of...

Well that is good they got back to you. Definitely let us know how it turns out.

The bags from the factory have those little air relief valves (the ones with 5-6 holes in the top) that are supposed to let the air out but they don't seem to be able to keep up with the pumps. I...

Good to know. I appreciate the info!

For my own knowledge are heads not considered a "hard part" on a motor? (I only ask for my own knowledge so I don't sound like a fool lol) Also in you digging did you find out if the heads are...