Search:

Type: Posts; User: parrothd

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. If you have a raptor motor just remove the plugs,...

    If you have a raptor motor just remove the plugs, no need for any antifreeze, warming or anything.
  2. Replies
    16
    Views
    318

    debond and soak it for a few days and wood shims...

    debond and soak it for a few days and wood shims otherwise you'll scratch/break the gel coat getting them off.

    Tap the shims in a little each time you use the debond, gotta go really really slow.
  3. Replies
    16
    Views
    318

    Plate? Like the wake plate hinge? Debond...

    Plate? Like the wake plate hinge?

    Debond spray, scoring the edges, the longer and more spray used the easier it comes off, use some small wood shims to help pry it off slowly after using the...
  4. Thread: 2022 Software

    by parrothd
    Replies
    108
    Views
    8,304

    You can always flash your original firmware back,...

    You can always flash your original firmware back, go into the settings and get the version you have now, have the dealer download that as well. :)
  5. Thread: 2022 Software

    by parrothd
    Replies
    108
    Views
    8,304

    Technically the latest updates for the 4in are...

    Technically the latest updates for the 4in are 20200527..
  6. Thread: 2022 Software

    by parrothd
    Replies
    108
    Views
    8,304

    There's updates for the 4in screens and 7in...

    There's updates for the 4in screens and 7in screens. It does some bug fixes, go home leveling, speed set points and options to show the ballast levels and autowake pitch roll numbers on the main...
  7. Replies
    5
    Views
    541

    Just an FYI I bought thos ebay o2 sensors and...

    Just an FYI I bought thos ebay o2 sensors and ended havibg to replace them pretty quickly.
  8. Replies
    9
    Views
    840

    Check the breaker in the engine compartment...

    Check the breaker in the engine compartment behind the bench seat center. It's near the coolant so you probably bumped it.
  9. Thread: 2022 Software

    by parrothd
    Replies
    108
    Views
    8,304

    Call the dealer, tell them moomba has a new...

    Call the dealer, tell them moomba has a new software firmware for your boat and you would like them to contact skiers choice and download the new firmware. Ask them to let you know when they have...
  10. Replies
    5
    Views
    541

    Also, you may want to check the wiring first, the...

    Also, you may want to check the wiring first, the ballast bags can push in the engine divider walls and crush the sensor, might save you some $$$.
  11. Replies
    5
    Views
    541

    Website down? Is that a code reader? 3217...

    Website down?

    Is that a code reader?


    3217 is the pre cat sensor, this is locted on the exhuast manifold, 3222 is probably just more info....
  12. Replies
    10
    Views
    398

    Do you have a heater? If so, check the hoses and...

    Do you have a heater? If so, check the hoses and the housing on the heater surflow pump located near the engine. These leak and very hard to spot.
  13. Replies
    10
    Views
    398

    Which boat?

    Which boat?
  14. Replies
    20
    Views
    1,722

    Somewhere around 1k a few years back just for...

    Somewhere around 1k a few years back just for Inclinometer. I could've add the draft sensor for more $$$ but skipped that. Just depends on how good your dealer is or contact skiers choice directly.
  15. Replies
    20
    Views
    1,722

    I added it to my Craz, I would ask your dealer,...

    I added it to my Craz, I would ask your dealer, it's all plug and play..
  16. Replies
    18
    Views
    735

    Dead battery..

    Dead battery..
  17. Also if the light comes on when you fill the...

    Also if the light comes on when you fill the ballast it means the wall is collapsing into the engine and pressing on the O2 sensor wire.
  18. Just making sure you checked ALL the o2 sensors,...

    Just making sure you checked ALL the o2 sensors, there's 4, 2 before and 2 after.

    Usually it's the after 02s that go bad and I got easily got confused and change the wrong one. :)

    Sorry the...
  19. Replies
    12
    Views
    632

    Replace whole sections at a time and you won't...

    Replace whole sections at a time and you won't notice the color differences, like all seats or the whole sun deck is generally what I do.
  20. Replies
    33
    Views
    1,593

    Shouldn't the roll be greater than -.5? Like -3...

    Shouldn't the roll be greater than -.5? Like -3 and plus 5, not sure what the defaults are for your boat.
  21. Replies
    33
    Views
    1,593

    Also, you need at least 10 feet water, anything...

    Also, you need at least 10 feet water, anything less and your our of luck.
  22. Replies
    4
    Views
    203

    Power distribution module?

    Power distribution module?
  23. Replies
    33
    Views
    1,593

    The tabs allow less roll when idle but when...

    The tabs allow less roll when idle but when surfing you need roll.
  24. Replies
    4
    Views
    203

    Also try turning the main power on off to reset...

    Also try turning the main power on off to reset things.
  25. Replies
    4
    Views
    203

    I have a different boat(Craz) but my surf system...

    I have a different boat(Craz) but my surf system was recently going crazy like yours. I traced it to the pdm, when I disconnected the wire connectors they had water shorting it out. Dried out the...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4