Search:

Damn, your wave looks fantastic.

My boat came with no bow bag. It appears that the front top hose runs back to a t-fitting, near rear of the tank, where it is joined to the hose from the rear top and those continue to the overflow...

Thanks, I'll verify today.

I'm trying to diagnose a leak in my center ballast tank and am trying to determine what the 3 hoses on the tank are for.
- 1 at the bottom rear of the tank is the fill/drain line, I assume
- 1 at...

So sorry for your loss.

or this one.

https://www.wakemakers.com/products/jabsco-ballast-puppy-oem-pump?gclid=CjwKCAjw1MajBhAcEiwAagW9MakqNrmf23csGJjI3d2EJ9VA7tLQUGB2Ij4voDxdySVPfYR3MJKUcRoCs-IQAvD_BwE

Where are they 200? I'm seeing 270 on wakemakers.

https://www.wakemakers.com/products/jabsco-ballast-puppy-wakeboard-pump

The shaft spins by hand, just not when plugged in and getting power applied to it.

Ayone ever rebuild one of these? One of mine is getting power but the shaft the green impeller is on is not spinning. I have removed it from the boat but haven't started taking it apart yet.

Thanks for the input. I got a new nut and went with that OJ dripless seal. My neightbor and I installed it on Saturday AM, about 3 hours and we surfed all afternoon no issues.

On the bottom is the prop nut, on the top is the nut attaching the shaft to the coupler.
30845

They look different, I'll post a picture of the 2 later. I'll give Glide a call and check into that, thanks again.

Wil this seal work as a replacement:

https://www.wakemakers.com/products/oj-flex-gland-shaft-seal?variant=41456604840101

I haven't had any service done in probably 5 years.

There is a key on the shaft/coupler. I guess I'll check the shaft seal, replace if necessary and put it all back together.

Any idea where I...

So this happened this weekend. My prop shaft came out of the coupler. Not sure if the nut broke or just came loose, I haven't gotten into it yet.

When I get the the coupler off and if I can get...

This might help:

https://forum.moomba.com/showthread.php?26912-2014-LSV-Cracked-Center-Ballast-Tank

I may have one for sale soon as well.

Interesting, cause I went from a home made suck-gate to the nauticurl slim and I love it. Since adding that and a 1000 lbs of lead, I am extremely happy with my wave. Makes me wonder about about...

Has anyone tried this? Really interested.

Installed a couple of weeks ago and no issues.

Finally ordered the part, I'll let you know if it works.

Yep, welcome back Mandley. Now we need to find wayward Trayson.

I think that is the one I was getting. One of the numbers indicates right or left. I switched the sensors and the code popped for the other side so I'm pretty sure mine is bad. I'll check on the...

I have a 2014 Moomba with the 330 HP engine.

Is this the O2 sensor I need:

https://www.bakesonline.com/indmar-exhaust-manifold-4-wire-o2-sensor-for-catalyst-manifolds.html

Thanks in advance...

So after I post I did some serches and found some Liquid force boards on sale for 47% off but all sold out. Didn't see anything else in this discount rangge,