Search:

Type: Posts; User: cab13367

Page 1 of 20 1 2 3 4

Search: Search took 0.08 seconds.

  1. Replies
    69
    Views
    4,576

    KG, Yes, u can just connect one pos and neg...

    KG,

    Yes, u can just connect one pos and neg pair from the amp to ur first speaker then connect the pos of speaker 1 to the pos of speaker 2, and the neg of speaker 1 to the neg of speaker 2. That...
  2. Replies
    69
    Views
    4,576

    Gotcha. Sounds like you have it pretty well...

    Gotcha. Sounds like you have it pretty well figured out then.

    Let us know how it goes and be sure to post up some pics along the way.

    Al
  3. Replies
    69
    Views
    4,576

    Dusty, "Preferred" implies you have more than...

    Dusty,

    "Preferred" implies you have more than one option but with one amp and a dual voice coil 4 ohm sub, there really is only one option. And that is to wire the two voice coils in parralel as...
  4. Replies
    69
    Views
    4,576

    Dusty, Running a separate home run from each...

    Dusty,

    Running a separate home run from each speaker to the amp (8 wires in all) is certainly the best way to do it, but you are going to have a hard time running 4 pairs of 12 gauge wire thru the...
  5. Replies
    69
    Views
    4,576

    Dusty, A better way to wire the speakers is to...

    Dusty,

    A better way to wire the speakers is to run the neg from the amp to the neg on speaker 1, the pos from the amp to the pos of speaker 2, then connect the negs of speakers 1 & 2 together, and...
  6. Replies
    9
    Views
    838

    Agreed, and I was going on the assumption that...

    Agreed, and I was going on the assumption that Dusty had correctly sized the 8 AWG cables to the amp. I personally used 4 AWG.
  7. Replies
    9
    Views
    838

    Dusty, Please see the table in the link below....

    Dusty,

    Please see the table in the link below. To answer to your question as to what gauge cable you should use for your input when using (4) 8 AWG outputs - you want the size of the input...
  8. Replies
    58
    Views
    4,483

    cab13367 is my username at work (first 3 letters...

    cab13367 is my username at work (first 3 letters of last name followed by employee #). It meets the criteria for usernames for most sites so I use it for everything. That way, I don't have to...
  9. Thread: Flowrider!

    by cab13367
    Replies
    8
    Views
    699

    Flowrider!

    We were on a cruise ship Thanksgiving week (on Royal Carribean's behemoth, the Oasis of the Seas, the largest cruise ship built to date) and they had two of these Flowriders on the ship. Very tricky...
  10. Replies
    2
    Views
    529

    Follow the link to your sub. Click on the wiring...

    Follow the link to your sub. Click on the wiring wizard tab. Follow the wiring configuration for two subs that results in a 2 ohm total load. This will deliver 450W rms to each sub so be careful with...
  11. Replies
    15
    Views
    1,402

    1. Like daze says, you must have the new ballast...

    1. Like daze says, you must have the new ballast system with the reversible pumps. They are on a timer so that they shut off after a certain time. You need to reprogram the timer (instructions are...
  12. Replies
    22
    Views
    1,890

    Jesse, You are doing the right thing! The...

    Jesse,

    You are doing the right thing! The last two houses we bought, we did so with the boat in mind. We told the realtor that our boat had to fit in the garage but the problem is that most...
  13. Now I got it, thanks. I've done this before also...

    Now I got it, thanks. I've done this before also when I had a couple inches of water in the ski locker. I just disconnected the drain hose from the bag and held it down against the ski locker floor...
  14. Huh? How do you suck water in from the lake with...

    Huh? How do you suck water in from the lake with the drain pump and then reverse it? I'm confused. :confused:
  15. Replies
    8
    Views
    777

    Thanks doc. I doubt anyone would remember to...

    Thanks doc. I doubt anyone would remember to close the valve at the engine on hot/warm days but I don't think it would be an issue, unless you boat in 80 degree water on 100 degree days. But then...
  16. Replies
    8
    Views
    777

    I am not understanding this - how exactly do you...

    I am not understanding this - how exactly do you hook up this Y fitting and how does it provide more water flow/heat at idle?
  17. Replies
    22
    Views
    4,052

    David, Thanks for the help. I was thinking a...

    David,

    Thanks for the help. I was thinking a 20 amp switch since that is the max voltage that the charger can deliver.

    Al

    Al
  18. Replies
    22
    Views
    4,052

    Dave, Thanks for the thorough and informative...

    Dave,

    Thanks for the thorough and informative reply, as always. Just one more question - what type of switch should I use on the charger lead to the starting battery, and do I just splice the...
  19. Replies
    22
    Views
    4,052

    David, Thanks for the info. Would you mind...

    David,

    Thanks for the info. Would you mind responding to this question:

    So this winter, I am going to add a second stereo battery to my system for a total of three batteries (one starting, two...
  20. Replies
    22
    Views
    4,052

    Wow, lots of failed units being reported on that...

    Wow, lots of failed units being reported on that site. Have only had mine about 6 months and it's worked perfectly so far. Wonder if the other guys are getting theirs wet?
  21. Replies
    22
    Views
    4,052

    Thanks. Looks like you have the same charger as...

    Thanks. Looks like you have the same charger as me - so are your batteries and your charger wired like I described?
  22. Replies
    22
    Views
    4,052

    So this winter, I am going to add a second stereo...

    So this winter, I am going to add a second stereo battery to my system for a total of three batteries (one starting, two for the stereo). I have the Prosport 20 Gen 2 dual bank charger and want to...
  23. Replies
    5
    Views
    659

    Garn, Check the underside of your muffler - is...

    Garn,

    Check the underside of your muffler - is there a drain plug? There is on mine but not sure if the LS is the same.

    Al
  24. Replies
    8
    Views
    1,057

    Check the classifieds for the racks!

    Check the classifieds for the racks!
  25. Yeah, 4 gallons seems like a lot from under the...

    Yeah, 4 gallons seems like a lot from under the gas tank. And it would have come out all at once. Maybe in your case, some of the water under the locker is coming out under the bulkhead.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4