Search:

That's exactly what Newty did. Search his posts to see lots of pics.

I don't have that problem. The screws are tight, no rattles.

If you are talking about the walkway wall on the passenger side, that is pretty thick. I removed the spotter seat backrest at the...

razz,

It's been a year since I installed the sub but I did make sure that it's only receiving low frequencies and the frequency cut off that I used was consistent with the sub and lines up with...

Hi Joe,

Sorry for the late post. I was off the board for a long time, have been trying to make up for it the last few weeks :)

Good to hear your system sounds good. Funny, I just scored a...

Joe,

Looks good! So does the sub sound "boomy"? Is your foot box sealed?

Al

Joe,

I don't know. I thought poly fill has the effect of making a small enclosure act like a larger one. I think the boominess comes from the fact that the Polk/MOMO sub likes a sealed enclosure...

I don't remember. Stick your head in the ski locker and look towards the footbox. You'll be able to see right into it and can measure the depth.

Al

joe,

The bass is boomy, not tight. I may build a custom sealed enclosure over the winter. Hole was easy to cut - I used a jigsaw with a scroll blade. I covered the carpet with masking tape before...

hydro,

I just finished installing mine as well. After I cut the hole, it was apparent that it was NOT going to be an easy task sealing the footbox. It's wide open to left (can look into it from...

Newty,

Did you ever finish the sub install and can you please post pics. I've not started mine yet.

Thanks,

Al

Sure, I know AutoDesk. We use AutoCAD here, just upgraded to 2008. We have a team of close to 20 drafters and technicians that use AutoCAD and Microstation. I work for Black & Veatch (bv.com) and...

Hey Reese,

Check out pdxwake.com for more info and lots of good pics of riding on the river, including some good sequence pics. There are some good riders out here (me not being one of them :o)....

Reese,

What do you do for a living that it brings you out here?

It might be a little while before I dig into this project. I took some rough measurements and it looks like the largest volume...

Thank you to all those that chimed in on my original question. I still like the stock location versus any other options so I am going to attempt to make a sealed, properly sized enclosure out of the...

Reese,

I also work in Lake Oswego, on Meadows Rd. Where is your office and what do you do?

Regarding boating up here, I think Eric Z summed it up pretty well. I moved here from Denver over a...

Tazz,

Thanks. I stuck my head in the ski locker and looked toward's the driver's side and was able to see inside the ski locker. There are no obstructions that would prevent installation of the...

David,

Could you please post a pic that shows the full width of the kick panel?

Thanks,

Al


NCSU,

Jesse,

It's the same on my LSV - there is a hole on the right side on top on the kick panel that wiring harnesses go through. I cannot see the back of the kick panel from the bow storage as it's...

I am getting ready to install a 10" subwoofer in my 2006 LSV, in the factory location. I plan to install it dead center in the driver's foot panel. One one pic that I saw in Pride and Joy, it looks...