Search:

I have a FLOE and I believe I set mine bunks 18" on center each way. I set the height high originally, and then worked my way down so that I can just float my boat across the entire carriage (which...

Do you know if they did this on all their 18s? II'm interested in doing it to my Craz...any chance you can post a pic of the wiring already done for you?

2 things...most likely a kink in the bilge hose (heard a lot about that). Also, open the oil file cap and take out the oil cartridge. I got a lot more oil out after doing those two things.

snake has bitten me...my floor channels got destroyed.27723

Is your board rated for 220#? That could be the issue. I'm around there :), and I barely surf with my wife/kids board (P5 Oogle). Basically need to pump the entire time and it gets exhausting. I now...

I think I found it...hard to see in the first pick of the strainer, but if I you look past it, there is a valve on the floor (2nd pic). guessing this is what I close when I attach a hose to the...

is there a shut-off valve you need to close when using the strainer? Curious if there's enough gravity from the jug to push through since the in-take on the bottom of the boat would still be open....

Thanks for the discussion! I've also confirmed with Indmar as well (thanks KnowMojo) that the heater is part of the closed loop system, so it's already pumped full of antifreeze.

that Google doc was amazing RC_Hinojosa!!!

I've got an '18 Craz and plan to do my winterization at the end of Sept/beg of Oct. Being up North (MN), I do have the wonderful feature of heat on my...

I was looking at the A22s as well. New to the surf line of boat, so came in with a pretty open mind. Came to the final conclusion of...Malibu really cuts corners on the Axis, so don't really consider...